Hi, Hope someone can help me with this. I have a BX2200 that I had a hydraulic line leaking to the steering so I decided to change out all 4 lines. The power steering was working when I started this now it doesn't. I have a WSM so the lines are all hooked up correctly to the controller but no power steering.
I picked up the front end with the loader and turned the steering to both stops on the front axle thinking I had air in the lines but still nothing.
Appreciate any help
I picked up the front end with the loader and turned the steering to both stops on the front axle thinking I had air in the lines but still nothing.
Appreciate any help