4wd don't work on L295

S

stepdoctor

New member

Equipment
L295DT, loader, backhoe, John Deere 40W, International 140
Jul 3, 2011
26
0
0
Troutville Virginia
Does anyone know if there is a common problem or weak areas in the 4wd of an L295dt. The lever works, the drive shaft moves but front wheels do not engage. Also can the front diff/axle be removed without removing the radiator etc. It looks like there is enough room to move the diff forward and remove without taking off the front of the tractor. Thanks
 
I

ipz2222

Active member

Equipment
L235, bx2670
May 30, 2009
1,927
31
38
chickamauga ga usa
The front diveshaft is a male spline. the stub on the front differential is a male spline. They are connected by a 2 inch female spline. Possibly stripped.
 
B

becksmachine

New member
Feb 28, 2012
1
0
0
Spokane
stepdoctor said:
Does anyone know if there is a common problem or weak areas in the 4wd of an L295dt. The lever works, the drive shaft moves but front wheels do not engage. Also can the front diff/axle be removed without removing the radiator etc. It looks like there is enough room to move the diff forward and remove without taking off the front of the tractor. Thanks
Click to expand...
Hi stepdoctor, did you ever resolve your issues with the 4wd not working?

Dave
 
You must log in or register to reply here.

Top Bottom