N nick c New member Equipment L225 and L2250 May 16, 2013 5 0 1 ocala fl. usa Dec 9, 2016 #1 I removed the 6 large nuts from the studs, then I took a block of wood and struck it with a hammer on both sides, it did not move. Is there anything else holding the head on? thanks nick c
I removed the 6 large nuts from the studs, then I took a block of wood and struck it with a hammer on both sides, it did not move. Is there anything else holding the head on? thanks nick c
North Idaho Wolfman Moderator Staff member Lifetime Member Equipment L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more Jun 9, 2013 28,286 4,853 113 Sandpoint, ID Dec 9, 2016 #2 There is 6 large nuts and 3 smaller nuts for a total of 9. If you need the WSM for that tractor just ask, I have a copy.
There is 6 large nuts and 3 smaller nuts for a total of 9. If you need the WSM for that tractor just ask, I have a copy.