Frt Blade Angle Cylinder
- Thread starter fender76
- Start date
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Would help others if you offer advice on where to find one. Did you find yours thru a web search, dealer?? Craigslist Ebay.....???
I'm sorry, a member here (Makeer) had listed a complete blade assy less subframe for $500, which was exactly what my hydraulic guy wanted to build an angle cylinder. This gives me a spare angle cylinder, lift cyl. hoses & blade, although I don't see how you could damage the blade.
I received no response to my WTB listing.
Roger
I received no response to my WTB listing.
Roger
Advice for other members: What I did was watch Craigslist, found an older, gear B7100 w/a working frt blade assy (KUFD110) in Arkansas (903 mile round trip). The B7100 was rough, faded, some non-working functions, but good motor. I removed the blade assy & sold the tractor (first picture).
Since a gear B7100 is 5" shorter than a HST the subframe must be lengthened. This is best done while both pieces are attached to the tractor.
Roger
Since a gear B7100 is 5" shorter than a HST the subframe must be lengthened. This is best done while both pieces are attached to the tractor.
Roger
Attachments
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Much thanks. Went from "Delete Me" to a damn good informative thread. Again thanks for taking time to do this update.