Wheel weights
- Thread starter D2Cat
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
10each at 105# each (according to prints, not field weighed!)
I have been looking for wheel weights for the L4240 since early summer. Couldn't find anything pre-owned (non-dealer) specifically for Kubota. I was going to have to have a mount ring fabricated to then mount the weight to the wheels.
In my research I had printed a copy of NSSC Tractor Weight Catalog. The catalog shows weight and bracket pictures, model numbers and then weight, OD, ID, Thickness, and bolt hole locations/dimensions, and can they be stacked.
I had asked friends who have similar size tractors and they wanted weights, but had the same response I did. So I know at least two guys who can use some.
These fit L3240 - L5740, and probably many more. Some suppliers wanted $113 plus $42 S/H each.
It was a rainy, windy day yesterday so I decided to go on a road trip, 180 miles one way for the adventure!
I have been looking for wheel weights for the L4240 since early summer. Couldn't find anything pre-owned (non-dealer) specifically for Kubota. I was going to have to have a mount ring fabricated to then mount the weight to the wheels.
In my research I had printed a copy of NSSC Tractor Weight Catalog. The catalog shows weight and bracket pictures, model numbers and then weight, OD, ID, Thickness, and bolt hole locations/dimensions, and can they be stacked.
I had asked friends who have similar size tractors and they wanted weights, but had the same response I did. So I know at least two guys who can use some.
These fit L3240 - L5740, and probably many more. Some suppliers wanted $113 plus $42 S/H each.
It was a rainy, windy day yesterday so I decided to go on a road trip, 180 miles one way for the adventure!