ZD 326 loss of power

hoghunter44 · Sep 1, 2014

I have a ZD 326 with 52hrs on it. I got some bad fuel and now I have no power while mowing. It runs fine until I start mowing then no power. I drained the fuel, changed both fuel filters and still no change. Also blew back into the tanks. what kind of pressure does the elec fuel pump put up if its good? what else can I do? my grass is knee high now may have to bush hog first. lol. Any help would be great. Thanks

rentthis · Sep 2, 2014

When you replace the filters etc, did you bleed the bad fuel from the system? If not, you still have bad fuel in the engine. Try bleeding the heck out of the injectors. I don't know what kind of fuel problem you had but if it was water, you should be able to see it mixed with what comes out of the injectors. You might want to start bleeding at the injector pump first.

Search

ZD 326 loss of power

hoghunter44

New member

rentthis

Member