BX2660 Tail Lights

A

AshleyBS55

New member

Equipment

L245DT 4WD

Sep 30, 2013

86

0

0

Palestine, WV, US

Aug 24, 2016

• #1

The rear lights on my Kubota BX2660 aren't working. The headlights and hazard lights work. I just replaced both bulbs. It looks like the fuse for the rear lights is the same one that controls all the other lights. Is there a line fuse I'm missing somewhere?
Thanks.

 

R

RonBoyBX25D

Member

Lifetime Member

Equipment

B2650, LP Grapple, Bro-Tek spacers, QH, Box Blade, Landscape Rake, RB, and 1560G

Aug 1, 2015

477

3

18

Minneapolis, MN

Aug 24, 2016

• #2

Not sure if it is the same as my 25D but I didn't see anything. Any broken wires or not connected under the wheel well?

 

Daren Todd

Well-known member

Lifetime Member

Equipment

Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter

May 18, 2014

9,030

4,488

113

Vilonia, Arkansas

Aug 25, 2016

• #3

If it's a single wire going to the lights. Then it's most likely a ground issue causing the lights not to work. Could be a dinged wire inside a wheel well, or gunk in a quick connect in the wiring harness.

 

T

ThisIsNotaStep

New member

Equipment

2005 bx23 tlb

Nov 26, 2010

133

2

0

Ontario, Canada

Aug 26, 2016

• #4

Had the same issue for years but I'm always in the woods and the squirrels don't complain. Looked at it this year and the switch was the issue. Rocker and contacts needed cleaning is all. Take your time, they disassemble, clean and replace.