I have an old tractor with a backhoe that was neglected. An IPA joint cleaner and a lever operated Lincoln grease gun have cleared all the zerks. I had to replace a few zerks as well, but when the clog is in the joint the IPA is the ticket!
Recommend me a new grease gun
- Thread starter JackJ
- Start date
the lower turret piviot on my hoe would have trouble getting and also the universals on the PTO shaft for my blower (when installed) would be trouble also. Just too big and cumbersome , to each their own if they like it , but myself I have no issues with a regular adjustable end , the only benefit I could see is its holding power to try and force grease through a stuck zerk as already mentioned.I have never had a problem on my BX at this point. I have more problems pulling the damn rubber mat back than I do hitting the zerk with the L-N-L!!!!!!!!
This is the other one. I got mine on the Internet, but shortly after I seen them at one of my kubota dealers on the rack.
here is a link to one of wildfire's videos on greasing the 25D, https://youtu.be/RxaibmPXW2c?t=442 7:30 is where he shows them.
Last edited:
Combine the lock n lube with an extension and 90 adapter that has a zerk on it and you should be able to get just about anything. I keep one of these in the shed (and I think you can get the same thing for less at other places)https://www.amazon.com/XtremepowerUS-Lubing-Assortment-Adapter-Fitting/dp/B00FQXKFOC/ref=sr_1_1?ie=UTF8&qid=1488203911&sr=8-1&keywords=grease+adapter+kit: