I have a 1999 L4200 gst cab and I don't have 5 thru 8 gears . I have changed the hydraulic filter and replaced my hydraulic pump too.The power steering doesn't work in gear unless you increase rpm's to about 1500 rpm.Any ideas? Thanks
no 5 thru 8 gears
- Thread starter orange dog
- Start date
I'm not sure how yours works but my gears 5-8 are the same as 1-4 but with the rear in high range.
Gears 1-4, rear in low range.
Gears 5-8, rear in high range.
Is your rear axle not shifting from low to high?
Gears 1-4, rear in low range.
Gears 5-8, rear in high range.
Is your rear axle not shifting from low to high?
I have 1 thru 8 in high range and 1 thru 8 in low range. Im in high range. ill try low range and see what happens. I just don't have 5 thru 8 gears.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
With a GST pump pressure plays a huge role in the operation of the transmission, the fact that you don't have power steering unless it's in high RPM's leads me to think you have an internal leak in the GST system.
#1 get the WSM for your tractor and it will have a trouble shooting guide in it.
#1 get the WSM for your tractor and it will have a trouble shooting guide in it.