PTO Reverser for Grey's and others

coachgeo

Well-known member

Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Nov 16, 2012
2,460
32
48
Southern OH
This info was kindly PMed to me

Dave M7040 said:
For some time unfortunate people who unwittingly bought grey market small tractors like B5000 or B6000 and then discovered the pto turned the wrong rotation for implements they want to buy and use in North America.

Historically reverser gear box pto's were available but that supply seemed to have dried up until someone alerted the forum to this company who is in the USA and will build you a reverser with spline shafts to suit.
http://www.japanesetractorparts.com/pto-reversers

I am suggesting this is important enough to include in the Grey Market forum as a sticky.
Dave M7040
Will put link to this thread in sticky as suggested. Oh and there are links in the Fabrication Sticky about homebuilt solutions.
 
Last edited:

coachgeo

Well-known member

Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Nov 16, 2012
2,460
32
48
Southern OH
Yes I put that in this thread post #5. Pricey though. http://www.orangetractortalks.com/forums/showthread.php?t=31130
Thankyou for bringing it up previously. Sorry I missed it.

With that in mind; reminder folk if you see a good post or thread that you feel is valuable enough to go into the sticky links..... let me know as DaveM7040 did and I'll include it. Sometimes can't get around to reading every single new post to catch these great things myself.
 

edinottawa

New member

Equipment
B6000E, B6000DT, Massey Ferguson GC2300, Massey MF-14 x2, MF-16 x3, MF1650 x2
Dec 31, 2016
20
2
3
Near Ottawa Ontario
This info was kindly PMed to me



Will put link to this thread in sticky as suggested. Oh and there are links in the Fabrication Sticky about homebuilt solutions.
B6000, B1400, B1500, B5000, B7000 PTO reversers are available brand new from Tracpartz Netherlands (tracpartz.com) 266Euro = $300USD plus shipping.
 

edinottawa

New member

Equipment
B6000E, B6000DT, Massey Ferguson GC2300, Massey MF-14 x2, MF-16 x3, MF1650 x2
Dec 31, 2016
20
2
3
Near Ottawa Ontario
yeesh $300 US is about $400 in canucks.. kinda pricey for 2 gears, 4 bearings, 2 shafts and 2 PTO ends....
Undoubtedly you must find that $600+USD on Ebay for a used reverser (on the very rare occasions when one surfaces) or $800USD for one from the US company that makes them new is more attractive? Add shipping to that of course. Dunno, seems to me that $266E plus shipping is very reasonable, especially since so many people are clamoring on where to find one. So many opinions, so little time...
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,676
3,926
113
Greensville,Ontario,Canada
neither really, why pay more, unless you NEED it and/or can't wait ?
Dutch unit is an 'ok' price as I wouldn't be paying shipping fee.
I was thinking about what's involved, did some materials research, talked to my CNC guy...
If there were 50 people wanting these and would pay up front like EA requires, I could make them for $300 CDN, S&H extra of course.