Recommend a loader valve for B6100 plow?

S

Standing on the corner

New member
Jan 7, 2019
34
1
0
Hampstead, MD
I am seeking recommendations for a 4 way with float loader valve to run a front dozer/snow blade on my B6100.

The blade is homemade so if there is a certain type valve that works better than would have come on my tractor if it were optioned with a loader, then I would like to upgrade up front.

I just picked up the diverter block to tap into the 3 gpm? low flow system.

https://www.surpluscenter.com/Hydraulics/

Any particular valve spec I should be looking for?

I would probably run 2 single ended rams instead of one double ended ram for angle and 1 double ended for lift, float and down pressure.




Sent from my iPhone using Tapatalk
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,597
5,062
113
Sandpoint, ID
Standing on the corner said:
I am seeking recommendations for a 4 way with float loader valve to run a front dozer/snow blade on my B6100.

The blade is homemade so if there is a certain type valve that works better than would have come on my tractor if it were optioned with a loader, then I would like to upgrade up front.

I just picked up the diverter block to tap into the 3 gpm? low flow system.

https://www.surpluscenter.com/Hydraulics/

Any particular valve spec I should be looking for?

I would probably run 2 single ended rams instead of one double ended ram for angle and 1 double ended for lift, float and down pressure.




Sent from my iPhone using Tapatalk
Click to expand...
Your terminology is a little off, they are single acting hydraulic cylinders, or double acting hydraulic cylinders.

You could use this Valve, But you don't want to use single acting cylinders on a regenerative valve, you can but it will act all kinds of weird on you.

https://www.surpluscenter.com/Hydra...pact-10-GPM-Joystick-Control-Valve-9-7401.axd

You will also need a Power beyond plug and you will need another adapter to fit into the fill port for a return line.

https://www.surpluscenter.com/Brands/Brand/Brand-Power-Beyond-Kit-9-7401-B.axd
 
You must log in or register to reply here.

Top Bottom