B6100 Log Splitter Hook Up?

T

TrippeTree&Timber

New member

Equipment
Kubota B6100 4wd
Dec 18, 2010
26
0
0
Rochester, NY,United States
I would like to install a log splitter on my b6100, however it doesnt have hydro ports and im not sure how to set it up. I have a juction block up by the pump by the engine, and there is a port of somekind under the seat. Any advice would be great!
Thanks
 
RDR

RDR

New member

Equipment
M5400,B6100E,K008,L175,TG1860Diesel,JD355D,3)Leyland 154D's,YM2000,IH1466
Oct 13, 2009
147
1
0
Danevang, Tx.
When I replaced the transmission/axle/rockshaft assembly in my B6100E it had a fitting coming out of the top of the transmission on the right that was capped off. It looks like they used the transmission dipstick hole for a return. I took that out so I could check the trans. Don't remember exactly how it was since that was last summer. I could check or take a picture if you are interested. That seems a lot better than cutting and brazing a high pressure line.
 
You must log in or register to reply here.

Top Bottom