For Sale: Kubota Front wheel weights

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
8,964
4,329
113
Vilonia, Arkansas
Got a set of front wheel weights for a 2wd tractor for sale. Came off my L1501 but should work for a bunch of different models including the L175, L1500, L185, and possibly some of the larger models in that series. And can possibly fit some of the B series tractors as well.





Bolt holes are 5" on center and mount on the inside of the rim using the extra holes.



Each weight weighs 16.5 lbs.

Looking to get $50 obo for the set plus shipping. Pm me if interested.


Sent from my iPhone using Tapatalk
 
Last edited:

Russell King

Well-known member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
4,603
975
113
Austin, Texas
I was interested but my wheels have a space of 7.5 inches between the weight's mounting holes.


Sent from my iPad using Tapatalk
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
8,964
4,329
113
Vilonia, Arkansas
Another bump. Anyone interested??? :confused::confused: Make an offer on them and get them out of my garage :D
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
8,964
4,329
113
Vilonia, Arkansas
Sorry, I don't check back on this often. $45 plus shipping. Let me know if this will work.
That will be fine. I'll look into shipping tomorrow. Then send you a pm once I find out shipping options.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,901
4,266
113
40 miles south of Kansas City
So with a loader on the front you decided you don't need wheel weights? Hows the brackets going? Got pictures?
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
8,964
4,329
113
Vilonia, Arkansas
So with a loader on the front you decided you don't need wheel weights? Hows the brackets going? Got pictures?
Almost done. Should have the brackets to the back axles tacked together tomorrow. Then I gotta tear it all back apart to finish welding and paint. Will have the hydraulics tied in tomorrow as well. :D Will do a thread on the subframe and finish the auxiliary hydraulic thread once I get the loader mounted and finished. Had to stop and start over a couple of times to rework the subframe do to clearance and mounting issues. Not to mention drilling somewhere north of 40 holes :eek: Got 12 more tomorrow and I should be done :rolleyes:

Sold the front weight bumper today as well :cool: