I use a short boom pole that I made & hang log tongs off the end. If I can't get close enough I use a chain to pull it out so I can get the tongs on it.
L3800 Pulling power
- Thread starter Boria
- Start date
If you get the R4 tires and you want to run chains you will need wheel spacers in order to have enough clearance. With the ag tires you can widen the rims they come on so no need for spacers. Just something to consider.
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
I have a Grand L3830 and it pulls like a mule it'll pull a subsoiler 22" deep and it'll pull a 2 bottom plow in our heavy Adobe without problem .
Attachments
Last edited:
Woody Martin
New member
Equipment
2013 L3200 HST, 66" Loader, R-4's, L/P 1672 , L/P Box grader, L/P 1572 Rear Blad
I have an L3200 with R-4's. R-4's work for most of my applications but I will tell you that if a muddy situation pops up, the tires turn one time in the mud and the tread is full. How far you go then is questionable. If your not in your yard, go for AG. Power/ Go for it.
Backfire1
New member
Equipment
L3800 HST w/ loader, Land Pride 72 in. FM, 8 Ft Disk, 6 Ft blade, 6 Ft rake,