my little hog for the Kubota

been talking to some of you guys over the last couple months getting advice & tips..

took the plunge & ordered my baby hog & it did come in. finally got a little time in the garage to get in on the tractor.

now its just got to dry up enough to take it out the the yard to the brush/woods.

promised a pic or two so here it is on the ground & i'll post some pix on the tractor a bit later.

& of course i got the orange version.

ok im back after getting to play a little bit.




didnt give you guys much to work with earlier cause was on the phone.

now on a real com & can do a little better.

it was spongy & muddy but HAD to take the new toy out.

here's a couple pix of what it looks like now.

i ran it at the 540rpm setting on the PTO but man that seems to be turning slow. (engine RPM was 2500 at the little mark for it & PTO) seemed to cut fine, but since it is a baby cutter its obviously gonna be nibbling at the brush.

this is a TITAN & was sold by a little tractor place 30 mins from me.

its a 42" cut because thats what the manual said was supposed to be on this tractor instead of the 48".

now its just got to dry up some so i can do actual work with it instead of gomming around.