Plow seasons a coming
- Thread starter bandaidmd
- Start date
KenB2920
New member
Equipment
L5240 brush hog,flail mower,wicked grapple,tiller,Danuser F-8 PHD,BB,RB 7' rake
That's a nice setup you have there. I want to do something similar on by BX25 but need to add a 3rd function valve to control the blade angle.
BAP
Well-known member
Lifetime Member
Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Looks like a great find. I made one similar for my B2920 a couple years ago out of an old Fisher snow plow. It works great especially being able to change the angle.
alansz400
New member
Equipment
B7500. FEL, Piranha tooth bar, box scraper, post hole digger, 3 pt. bucket
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
PHPaul
Well-known member
Equipment
B2650, Pronovost snow blower, Landpride rotary mower, Howard tiller, box blade
At the moment, the maintenance bay of my garage is full of little projects. If everything goes according to plan (Hah!...) they'll all be gone in a week and I can get the Pronovost out of the back of the barn and prep it.
Mostly what it needs is some sanding, priming and touchup paint.
Mostly what it needs is some sanding, priming and touchup paint.
What are you folks using for pins for your snow plows. My recently acquired Curtis 7.5' plow attaches to my loader arms, but my local Kubota dealer said I must use a greasable pin. My existing bucket greaseable pins are not compatible with the plow's frame. Any help would be greatly appreciated. Thanks!
Sent from my Lenovo A5500-F using Tapatalk
mine is mounted to a ssqa plate so the pivot pins are stock greaseable kubota
Sent from my SM-N920V using Tapatalk