Does anybody know where I can get front rims to fit Kubota B7000 DT or if there is a part # from a North American dealer of Kubota that will fit?
Much Appreaciated!!
Much Appreaciated!!
Kubota Rims
- Thread starter Paul
- Start date
If you're looking for rims that will fit your Kubota B7000 DT, I guess it will be a good idea to visit JCWhitney. Here are the samples of Kubota Parts that they are selling.
I have one set of used rear rims (13.6-16) and one set of brand new rims with brand new turf tires installed on them. Email to odekolon@ymail.com
Mikefpa, what size wheels? on the F2100 the ones on the steering axle are the same size as on golf carts {8"} with 4" bolt spacing the wheels on the front of the F2100 are the same size as most five lug garden tractors 12" with 4.5" bolt spacing
I'm with Vic on this subject, unless you find a used set or are very well connected with a mfg that can make the proper centers you're pretty wel SOL.
And his way most likely the least expensive way to go too.
Al
PS: most Kubota wheels of the same size have totally different bolt patterns and the interchange between models almost zero.
And his way most likely the least expensive way to go too.
Al
PS: most Kubota wheels of the same size have totally different bolt patterns and the interchange between models almost zero.
Can anybody advise if 3103-2003 10-24 wheels have the same stud pattern as 67800-50120 8.3-24 ? What about the web offset?
I may have a lead on a pair of these NOS. The closest dealer wants the equivalent of almost US$500 each for 67800-50120.
Thanks for any help!
I may have a lead on a pair of these NOS. The closest dealer wants the equivalent of almost US$500 each for 67800-50120.
Thanks for any help!
Cancel that. I've just seen a picture, and they're 8 stud wheels.
Looks as though the advice given by tiredguy is good!!
Looks as though the advice given by tiredguy is good!!
cmorningstar01
Active member
Equipment
B7500HST LA302 FEL 5'Finish Mower B5100E 46" Snow Plow 22 ton splitter
Gemplers carries a selection of wheels which may fit your particular application.
Here is the direct link to the ag wheels page
http://www.gemplers.com/shop/ag-wheel
Here is the direct link to the ag wheels page
http://www.gemplers.com/shop/ag-wheel
Thank you for that tip - I've sent them an email enquiry, but I suspect that the shipping costs may be prohibitive. I'm also putting out feelers with the Chinese compact tractor dealers - they might have spare wheels of the right dimensions.