I have an L 2800 that when you lift the three pt hitch up slowly it jerks the whole tractor. Pull fast and it goes up normally. Pressures are normal @ 2200 psi I think its in the control valve but need some advice.
jerking 3 pt hitch
- Thread starter mcdee190
- Start date
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
do not know if below is also an issue with the L2800 or not
http://www.orangetractortalks.com/forums/showthread.php?t=17412
if you have not done so already do a search of this site on your model tractor to discussions others have had on your model's 3pt
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Keep an eye on the thread Coachgeo listed. I will update it as things unfold with my L3800. I am going to visit the dealer today.
The real bad ones can be adjusted internally (top of the valve body has to come off). But the basic L will always have a slightly jerky hitch, only noticed when raised VERY SLOWLY.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
If it just started doing it out of the blue, then something is wrong.
When was the filter and fluid changed last?
What kind and type of fluid and filter used?
When was the filter and fluid changed last?
What kind and type of fluid and filter used?