Which tips for 3rd function?

SilveradoBrian

New member

Equipment
MX5800, RCR1884 cutter, GS2584 scraper, PFL3048 pallet forks, Titan tree puller
Feb 17, 2019
5
0
0
Hamersville, OH
Hey everyone. 1st post. Got an MX5800 with the 3rd function on it. FedEx just dropped off a Titan tree/post puller with the flat faced couplers. I had picked up some standard Pioneer style to change them out, but they wouldn't fit the tractor. Apparently the ones on the tractor are 3/8", but a different style completely. Anyone else have this problem?
 

Titan17

Member

Equipment
L3901 TLB, Caroni RFM, Scag Wildcat ZTR, Piranha TB,York RE 96", MTL HD 48" grap
Jan 13, 2019
92
6
8
Uncasville, CT
Go to Summit Hydraulics website. Frequently asked questions and look at what size coupler do I need.
 

SilveradoBrian

New member

Equipment
MX5800, RCR1884 cutter, GS2584 scraper, PFL3048 pallet forks, Titan tree puller
Feb 17, 2019
5
0
0
Hamersville, OH
Quick Coupler Identification Chart. I've been all over the intranets the past couple of days; how did I miss that? Thanks, Titan!
 

Michael In Tennessee

Member

Equipment
MX4800HST
Mar 14, 2018
70
2
8
Niota, TN
Kubota seems to like ISO 7241-B. That is what is on my MX. I don't know about the 3rd function since its not a Kubota branded part. Its either Land Pride or WR Long.

But, I'm going to use common ball tip AG couplers (ISO 5675) for my 3rd function and rear remotes. That is the type of connector coming on my grapple. Also, due to the lack of finding 3/8" couplers, I'm going with 1/2" couplers. From Summit Hydraulics, they are a tad cheaper and come with dust boots. Either size is over kill. I know that I need to add a restrictor orifice on my Top link already.
 

Hozzie

New member

Equipment
M7060 Cab
Nov 21, 2018
14
4
3
Middle TN
I would change the third function to 1/2 flat flace in front. Much better connection and easier to use in my view. I have them on my MX5800 as well, but was able to tell the dealer to use flat face when installing third function.