L4310 steering cylinder removal?

H

halfbean

New member

Equipment
M9540
Mar 17, 2017
2
0
0
Slocum, Tx
My 4310 steering cylinder is leaking around the piston on end closest to the seat. I was wondering if there is an easy way to remove it? It looks like the radiator may have to be removed to get the pin out of one end. Has anyone done this?
Thanks
Hal
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,667
5,098
113
Sandpoint, ID
The pin drops out the bottom, there is a keeper plate with 2 bolts holding the pin in place.
 
H

halfbean

New member

Equipment
M9540
Mar 17, 2017
2
0
0
Slocum, Tx
According to the diagram and feeling up in there, the pin that is on end of steering cylinder rod has a piece of round bar welded on top so it won't come out the bottom. It is right underneath the radiator and there isn't enough room to lift the pin up. At least that is what I'm seeing. I was just wondering if there was a way to do it without unbolting radiator?
 
CaveCreekRay

CaveCreekRay

Well-known member
Lifetime Member

Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Jul 11, 2014
2,631
93
48
Cave Creek, AZ
hb,

Can you unbolt the radiator while still keeping the hoses on (wet) and simply lift it up enough to clear the pin?
 
You must log in or register to reply here.

Top Bottom