looking for a mower deck drive shaft (B7100)!!
- Thread starter rafspeed
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
I have one half of itJust bought a cheap deck mower for my old b7100
But to owner could'nt find the drive shaft that is between the deck and the tractor. Dealer want 600$ for the said drive shaft...
Anyone has this laying around?
the half that goes from MMM under the tractor - the other half had to be cut off do to the quick release that ....well, unsprung itself!
Last edited:
kubotasam
Well-known member
Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
I have a complete pto drive shaft for a mid mount mower for a B8200 hst. I am guessing the ends would be the same but the shaft would be a little long. It is from a RC60-82H deck.Just bought a cheap deck mower for my old b7100
But to owner could'nt find the drive shaft that is between the deck and the tractor. Dealer want 600$ for the said drive shaft...
Anyone has this laying around?
kubotasam
Well-known member
Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
It is aprox 17 3/4" collapsed. Hard to say exactly how long it could run because it will pull all the way apart and you need a certain amount of overlap. Somewhere around 21" I would guess. Here are some photos. In one it looks like the splines are bad. They are just covered with some sawdust and grease. I can clean and take another pict if you want. I will take $200.00 plus what ever it costs to ship.
