New member with an L4400 and a problem

shooter620

New member

Equipment
L4400
May 25, 2018
1
0
0
Ponchatoula, La USA
I have an L4400 that wont start, I have power to the starter from the battery and power to the ignition switch, but I am not getting power to the exciter on the starter. I have replaced the ignition switch, starter relay and the fuse and am still getting no power. Any advice?
 

Jim L.

Active member
Jun 18, 2014
811
86
28
Texas
PTO should be disengaged to start.

Could be in safety circuit (Operator Presence).

Workshop Manual (WSM) will show electrical circuits to get it started. Check to see if seat switch is working properly.