New Tractor

TopesRule

TopesRule

New member

Equipment
L4060 HSTCC
Mar 1, 2015
22
0
0
New Brunswick
Delivered Friday night. Moved some pile of snow over the weekend. Was colder than -30 Saturday morning and started like a top with the block heater plugged in. Really like it so far. Need to make drift cutters for getting into the deep snow which I have a lot of.
 

Attachments

Last edited:
skeets

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,158
2,822
113
SW Pa
Welcome to the orange, and congrads on your new toy,,errrrrr tool I meant tool,, and we are a visual bunch in here and we loves tractor porn,, so pictures my friend pictures
 
M

mickeyd

Active member
Lifetime Member

Equipment
2014 L3200 DT w/LA524 FEL, 2019 Kubota Z121S w/ 48" Pro Dec, TG1860G w/RCK54TG
Mar 21, 2014
1,192
17
38
Guin, AL
Welcome to the forum from much warmer Alabama. I have last years model without Tier 4. Great machine isn't it.
 
CaveCreekRay

CaveCreekRay

Well-known member
Lifetime Member

Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Jul 11, 2014
2,631
93
48
Cave Creek, AZ
Welcome!

Post lots of pics of your snow fighting efforts! We like 'em, especially us folks in Arizona. We go back and watch 'em in July!:D

(Pics upload easily on the MANAGE ATTACHMENTS button below the main frame when you write a post... Lower-res pictures are all that upload so you may have to shrink the resolution a tad...)

WELCOME!!!
 
TopesRule

TopesRule

New member

Equipment
L4060 HSTCC
Mar 1, 2015
22
0
0
New Brunswick
I should have taken some before pictures. I could barely get my four wheel drive half ton in the driveway.

I've noticed when I have the PTO engaged for the snow blower and the TPH raised all the way there's a nasty sounding noise that seems to be coming from the tractor. Should I avoid putting that kind of angle on the PTO shaft or would you guess that the shaft may not be cut to the correct length? Everything seems to work and sound ok as long as I avoid fully raising the TPH with the PTO engaged.
 
nzzshl

nzzshl

Member

Equipment
1982 Yanmar GT14(YM146), 2015 BX25, BX5450 snowblower
Jan 12, 2015
85
4
8
Fenton, Mi
That is a nice tractor, TopesRule! Tools like that have a way of being subject to uses immediately upon delivery, it seems. Break her in well and enjoy the ride!
 
85Hokie

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,347
2,170
113
Bedford - VA
TopesRule said:
I should have taken some before pictures. I could barely get my four wheel drive half ton in the driveway.

I've noticed when I have the PTO engaged for the snow blower and the TPH raised all the way there's a nasty sounding noise that seems to be coming from the tractor. Should I avoid putting that kind of angle on the PTO shaft or would you guess that the shaft may not be cut to the correct length? Everything seems to work and sound ok as long as I avoid fully raising the TPH with the PTO engaged.
Click to expand...
Could be several things, is your pto cover hitting anything at the height? And like you said - it could be a bind that you are placing it in with the length of the pto too. Take the PTO and raise it (off) see if you can measure the length accurately - then take it off and see if it will move MORE than the measured length - this will tell you if it is binding.:)
 
A

aeblank

Member
Jun 19, 2013
411
1
16
Cadillac, MI
I suspect the shaft is too long. Need to take some measurements. I'm sure you can find instructions.

Sent from my XT1254 using Tapatalk
 
You must log in or register to reply here.

Top Bottom