looking for a B6000E reverser

JPB6000E

New member

Equipment
B6000E
May 17, 2016
4
0
0
Ohio
Hey there. just looking to see if anyone out there has a reverser that there willing to part with. bought the tractor and found out that the pto spins the wrong way :(

Thanks

John
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,901
4,269
113
40 miles south of Kansas City
John, you better look hard and jump quick! There are not many to be seen, and the last time I saw one sell it was in the $500-600 range.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,901
4,269
113
40 miles south of Kansas City
A lot of category 1 attachments will work as long as you don't need a PTO shaft to turn to make it work. A tiller or trailing mower requires a reverser.
 

djmc35

New member

Equipment
4 Kubota B6000's, Cub Low Boy, Sears tractor w/FEL
Jun 19, 2014
79
0
0
Bloomington, IN, USA
I have a B6000 and I mow with a Woods RM48YM-1 with factory right hand blades. Works Great and no Reverser Needed. If you can find one you can get a mid mower deck that runs off the front PTO again no reverser needed. Also they came out with a bush hog 4' and made for the B6000 backward swing. Sorry can't remember the model of it but it didn't need a reverser either. djmc35. Reverser's are over rated and I have one! Just my Opinion of course.
 

djmc35

New member

Equipment
4 Kubota B6000's, Cub Low Boy, Sears tractor w/FEL
Jun 19, 2014
79
0
0
Bloomington, IN, USA
Well I will get the reverser off in the next dry day down here after the weekend. I will check to see if its an18 spline or a 10? In the meantime check your output shaft and see how many splines it has? You may think my price is an arm and a leg but they are getting harder to find. I will give you 1st chance. If you find another one that's ok. I have not decided to sell it but all this cash people are talking about has started tickling my ears. Have a good weekend djmc35
 

JPB6000E

New member

Equipment
B6000E
May 17, 2016
4
0
0
Ohio
My output shaft on the tractor is a 10 spline. And okay let me know!!! I would love to have it. I have alot of work around the house for this little guy!!
 

Big Trees

New member
Aug 28, 2015
119
0
0
Texas
I use a 3 foot bush hog behind my B6000E and don't have a reverser. The only thing I would see a reverser would be good for is a tiller or a post hole digger. The bush hog doesn't care which way the blades swing, they go whatever way the pto tells them to. Just sharpen whatever side of the blades you need. I use mine quite often.


If a reverser didn't cost as much as I have into the tractor and bush hog then I might think about it but with the cost involved I'm perfectly fine without one LOL.
 

djmc35

New member

Equipment
4 Kubota B6000's, Cub Low Boy, Sears tractor w/FEL
Jun 19, 2014
79
0
0
Bloomington, IN, USA
Hey JPB6000E, I guess your not interested in my Reverser. So now if Anyone out there needs one for $600. I have one. djmc35
 

Big Trees

New member
Aug 28, 2015
119
0
0
Texas
I'd really like to get one for a tiller but it'd be real hard for me to pay $600. I know that's probably what they go for but dang.

Let me know if you don't sell it and want to negotiate. If not, no biggie. Good luck with sale.