Install L2052 on L3710

boozaro

New member
Lifetime Member

Equipment
L3710, LA681, L1743A, K9048, BL 4690-1 w/12" bucket, L2052-1
Nov 29, 2017
23
0
0
Leavenworth, WA, USA
First, thanks to the admins for creating and running this site. It has been very helpful.

I recently purchased an L3710 with a loader and a back hoe attachment. I managed to get the loader off (I'm sure I didn't do it correctly - not pretty =- but it's off). I need help attaching the 2052 blower.

I've got the unit hooked up to the mid-PTO (all shafts and the pin), but I am having an issue with how the black unit attaches to the front of the tractor. There is a "U" shaped bracket that looks like where it needs to go, but I don't see what would keep it in place (from falling down). Maybe I am missing a part.

Any help with the install would be greatly appreciated. Snow is just around the corner, and I'm gonna need this orange monster throwing snow soon. Please let me know if there's any additional information you need to answer my question.

Thanks for your help. Have a great week.

Scott
 

mickeyd

Active member
Lifetime Member

Equipment
2014 L3200 DT w/LA524 FEL, 2019 Kubota Z121S w/ 48" Pro Dec, TG1860G w/RCK54TG
Mar 21, 2014
1,192
17
38
Guin, AL
Welcome to the OTT forum Scott.

Sorry I can't help with the snow blower since we don't ever get that much snow but I am sure someone on her will be able to help with it.

If you posted some pictures of it, it might help.
 

boozaro

New member
Lifetime Member

Equipment
L3710, LA681, L1743A, K9048, BL 4690-1 w/12" bucket, L2052-1
Nov 29, 2017
23
0
0
Leavenworth, WA, USA
Thank you for the advice, sir. I should've thought of that. Here are a few photos of the area I am talking about, as well as the pinned portion further underneath the tractor.


As you can see in the photo- it looks pretty clear that the attachment should move right up into the bracket, but how does it get held in?

If possible, I was curious if it mattered what ports I plug the hydraulic lines into. Right not, I have the two lines from the hydraulic lift in the inner ports and I was planning to connect the blower directional controls into the outer couplers. Does it matter? Is this (in)correct?

Thank you again for your help.

Scott
 

Attachments

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,856
113
Sandpoint, ID
You should have 2 pins (19) and 2 sets of 2 half bolt sections (17,18).
that is what holds it in the V slot.
 

Attachments

boozaro

New member
Lifetime Member

Equipment
L3710, LA681, L1743A, K9048, BL 4690-1 w/12" bucket, L2052-1
Nov 29, 2017
23
0
0
Leavenworth, WA, USA
Thank you! I googled the manual on the 2052 but never found the image you posted. Thanks for the highlights, as well. Thank you again, sir.

Have a great week!

Scott