9x20 Enco Metal Lathe $800

Status
Not open for further replies.

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
9x20 Enco Metal Lathe $800
Excellent condition; single axis digital readout & shelf; upgraded 4 bolt compound clamp; upgraded 3 jaw chuck with reversible jaws; upgraded cross slide handwheel; added 5/8***8221; double disc ground bedding plate; wedge type quick change tool post with 7 tool holders; original 3 jaw chuck; 4 jaw chuck with reversible jaws; faceplate; tailstock chuck; follower rest; (2) steady rests; US & metric thread gears; live & dead centers; all tooling & wrenches; (2) indicators; over 100 carbide, HSS, & insert tool bits, c***8217;drills, drills, c***8217;sinks, boring bars, cutoff tools; rigid bench with storage drawer & shelf; ways protector for chuck changeout; spare drive belts & gears; 110V; 3/4HP; 130-2000rpm; .767+ spindle bore, manual.
Parts readily available, but the machine needs nothing.
This machine is more accurate & rigid than a new one!
Owner is retired Toolmaker/Senior Research Technician.
PM me if interested.
 

Attachments

Last edited:

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
Bump, machine goes on CraigsList this week for higher price.
 

bcp

Active member

Equipment
BX2360
Apr 20, 2011
644
77
28
SW WA
I wish it had been available when I lived 150 miles away instead of 1500.

:(

Bruce
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
That seems to be a common theme on this...
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,901
4,267
113
40 miles south of Kansas City
Bill, you've been more then fair with all of us. Transporting seem the biggest challenge, but you'll soon find someone who will drive over and pick it up! Thanks. Just wish I knew someone who was driving East!
 

sdk1968

Active member
Lifetime Member

Equipment
B2601HSD & CK4010HST 4WD/FEL
Oct 19, 2016
929
35
28
Ohio
9x20 Enco Metal Lathe $800
Excellent condition; single axis digital readout & shelf; upgraded 4 bolt compound clamp; upgraded 3 jaw chuck with reversible jaws; upgraded cross slide handwheel; added 5/8***8221; double disc ground bedding plate; wedge type quick change tool post with 7 tool holders; original 3 jaw chuck; 4 jaw chuck with reversible jaws; faceplate; tailstock chuck; follower rest; (2) steady rests; US & metric thread gears; live & dead centers; all tooling & wrenches; (2) indicators; over 100 carbide, HSS, & insert tool bits, c***8217;drills, drills, c***8217;sinks, boring bars, cutoff tools; rigid bench with storage drawer & shelf; ways protector for chuck changeout; spare drive belts & gears; 110V; 3/4HP; 130-2000rpm; .767+ spindle bore, manual.
Parts readily available, but the machine needs nothing.
This machine is more accurate & rigid than a new one!
Owner is retired Toolmaker/Senior Research Technician.
PM me if interested.
Bill,

its a good price (you already know that)... im just on the opposite coast..

we have a lot of gunbuilders from our site in your area.. if you want, soon as we get finished with our move to our new host, i'll put a link to this there for you.
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
Thanks guys, I appreciate any help you can give me. :)
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
D2Cat-

Len- check your PM box.

Bill
 
Status
Not open for further replies.