B 8200 WTB stabilizer bars

hunter.b2015

New member
Dec 23, 2018
17
0
0
Batavia
Just picked up a b8200 and I’m looking for a set of stabilizer bars for the 3 pt. Looks like they have broke and been welded over the years.



Sent from my iPhone using Tapatalk
 

SRG

New member

Equipment
B8200D 4WD........ JD 870, FWA, 300x FEL.......... JD 797, 72" Z-Trak
Jul 15, 2017
490
3
0
N. IL
I had the same problem for the most part. Mine were bent up pretty good. I couldn't turn them at all by hand and it took a good size wrench to be able to pry them around and that took forever.

I did this to my (now sold) B8200....
http://www.orangetractortalks.com/forums/showthread.php?t=34677

I cut off the old stabilizers from the axle side clevis, and re-used that clevis on the new stabilizers.
I sourced parts from here....

https://www.hoyetractor.com/
 

mickeyd

Active member
Lifetime Member

Equipment
2014 L3200 DT w/LA524 FEL, 2019 Kubota Z121S w/ 48" Pro Dec, TG1860G w/RCK54TG
Mar 21, 2014
1,192
17
38
Guin, AL
I got my Stabilizer bars from Hodge here on OTT.

They are outstanding and very well made.
 

SRG

New member

Equipment
B8200D 4WD........ JD 870, FWA, 300x FEL.......... JD 797, 72" Z-Trak
Jul 15, 2017
490
3
0
N. IL
I got my Stabilizer bars from Hodge here on OTT.

They are outstanding and very well made.
Unfortunately, he doesn't make the fantastic telescoping stabilizers for the B8200 because there isn't enough room and the B8200 requires too short of a stabilizer for the outside position. I have consulted him on this. I was disappoint.
 

coachgeo

Well-known member

Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Nov 16, 2012
2,460
32
48
Southern OH
Hopefully Blown has what you need ... otherwise

Have you checked the Ultimate Sticky at top of this forum? Would behove you to do so for there are links in there that will take you to info about where to get used parts and implements...... also where to get aftermarket parts and implements; as well as other information/links