View Single Post
Old 04-23-2018   #2
Dieselbob
2nd Yr. Apprentice
 
Dieselbob's Avatar
 
Join Date: Nov 2014
Location: Fort Wayne IN
Equipment: BX 2230, LA211 loader, 60 MMM, 2 wheel spacers, grille guard, gauges, bucket e
Posts: 197
Default Re: Tie down recs and loacation for BX

Here are the tie down brackets I made. I used existing bolt holes in the frame and got longer bolts to maintain full thread engagement. These are the recessed rings I have in my trailer floor. On a steel floor, I weld them in and try to place them as close as possible to a crossmember. On a wood floor, I also get them as close as I can to a crossmember, and bolt them through the wood and use a 1/4" steel back-up plate under the floor to spread the load out. In a steel floor, I cut a hole out with a holesaw. On a wood floor, I take a router and cut out a pocket for the ring to sit into.
Attached Thumbnails
Click image for larger version

Name:	DSC14405.jpg
Views:	205
Size:	82.3 KB
ID:	35566   Click image for larger version

Name:	DSC14407.jpg
Views:	196
Size:	92.5 KB
ID:	35567   Click image for larger version

Name:	B801A_front.jpg
Views:	153
Size:	54.2 KB
ID:	35568  
Dieselbob is offline   Reply With Quote