Hi - I have an old L225 Kubota with a loader that I think is the LA844. I've had the hydraulic cylinders repaired in the past to the tune of about $400 and just blew one of the bucket cylinders. The OEM specs are as follows:
Stroke 18.5 in. (469 mm)
Bore 2.17 in. (55 mm)
End-End 29 5/8" (closed) 52 3/8" (open)
Part number is 7J275-64014
I'd like to replace all the cylinders with non-Kubota cylinders, but the two bucket ones first. Since they are an odd size, any suggestions on what to replace them with? These Kubota cylinders are NOT an easy repair like every other one I've seen, so I'm ready to switch them out.
Thanks for any suggestions.
Stroke 18.5 in. (469 mm)
Bore 2.17 in. (55 mm)
End-End 29 5/8" (closed) 52 3/8" (open)
Part number is 7J275-64014
I'd like to replace all the cylinders with non-Kubota cylinders, but the two bucket ones first. Since they are an odd size, any suggestions on what to replace them with? These Kubota cylinders are NOT an easy repair like every other one I've seen, so I'm ready to switch them out.
Thanks for any suggestions.