B7410 Fel

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Hoping for an opinion on the B7410, doesn't seem to be the a lot of info on this model.
Are parts still avaliable ?

I'm looking at a 2005 Fel with 660 hrs for 6700.00, it seems in good shape.

Thanks.
It's a geared tractor so not very popular, everyone wanted the HST's.
Parts are still available and parts are shared over several models.

Not a Bad price for it either as long as it's in good condition. ;)
 

woodcutterc65

New member
Dec 4, 2018
6
0
0
Toronto, Ontario, Canada
Thanks for your note.

It would be going to a remote island in Northern Ontario, so service will fall on me, I'm pretty good but a clutch repair is out of my league.

If it hasn't been abused how much more life could I expect out of the clutch with 660 hrs so far ?

Thanks again.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,899
4,266
113
40 miles south of Kansas City
Woodcutterc65, if you can do any service on your tractor you can do a clutch replacement. It's just like anything else, just a series of small steps. Not any special wrenches required, really...just time and a bit of coaching. It's a good learning experience, confidence builder and opportunity to know how your tractors works.

The hours one can expect from a clutch is determined by how it is used and stored. Leaving a tractor set with the clutch face against the flywheel is probably more damage then constantly slipping the clutch. But under usual conditions 600-700 hours is nothing for wear!
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Thanks for your note.

It would be going to a remote island in Northern Ontario, so service will fall on me, I'm pretty good but a clutch repair is out of my league.

If it hasn't been abused how much more life could I expect out of the clutch with 660 hrs so far ?

Thanks again.
Just like D2 said:

A clutch job on these is really easy to do.

It's hard to say how long the clutch will last, it's a huge variable.
 

woodcutterc65

New member
Dec 4, 2018
6
0
0
Toronto, Ontario, Canada
Thanks to both of you for your responses, I appreciate the "series of small steps" sentiment, it's the way I approach any given project.

Back to my ignorance. I have driven lots standard cars and an old Massey 135 at my folks farm, but have never heard of leaving a vehicle with the clutch face set against the flywheel ???

What does this mean, how does this happen ?

Thanks in advance again !
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,899
4,266
113
40 miles south of Kansas City
If you leave your tractor for any length of time unused, put a block of wood on the top of the clutch petal and some part of the tractor to keep it pushed down. This keeps the pressure plate off the flywheel and it can not rust/seize to destroy the clutch facing. Probably a more important measure if you leave the tractor in an enclosed barn that allows the tractor condensation to build up.
 

woodcutterc65

New member
Dec 4, 2018
6
0
0
Toronto, Ontario, Canada
You learn something new ever day !
That is really interesting and useful to know.

Thanks very much, you've been really helpful.

I am going to give it a test this week and will post a pic if I make the purchase.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,899
4,266
113
40 miles south of Kansas City
Good luck with your search. Just ask lots of questions. I call it the Columbo technique (from the TV show). Be sure to ask some questions you already know the answer to, just to get and idea if the person is honest and/or knows what he's talking about.

Find out how long he's owned it, why he's selling, what he likes about it, what he dislikes, how does it start when cold, does it need attention to anything, etc? It gives you some insight.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,899
4,266
113
40 miles south of Kansas City
I begin by asking the dealer where he got it. Probably a trade in. Is it on consignment?

Ask the dealer if you can get the phone number of the previous owner. Then call him and ask the questions. The previous owner may not even answer the phone, or he may give you all the info. you ask for...you just never know.

Some people hesitate to call someone, but a phone call takes all of one minute if nobody answers, and 5 minutes to get all the info he will offer. Then you have first hand info of the item you're interested in. Gives you much more leverage to deal with, especially if you discover a "weakness" needing attention.
 

NoJacketRequired

Active member

Equipment
B7510 & LA302 FEL & B2782 blower, B7510 & B2781 blower, B2410 & B2550 blower
May 25, 2016
415
47
28
Ottawa, Ontario
I'll second this approach. Worked well for me last fall in purchasing my high-time B2410. Original owner was frank in describing how the tractor was used and maintained. To date I haven't found anything wrong with the tractor that he didn't describe as either being wrong or being suspect.