Search results

I found one about 3 miles from my house and wanting to know if it will work with my B7100 HST model tractor? I don't see any hydraulics on it but I have a small winch I could use for up/down. thanks. Here is a CL link: http://knoxville.craigslist.org/grd/3523146462.html

I have a couple of parts of a D750 engine from a B7100 HST tractor. Shipping will be $12 each flat rate USPS. Please PM me with questions. I have a good original nippendenso starter $50 A good fan/dynamo $50 A good hydraulic pump $75

As you probably know from my previous post that my 36" tiller is an older one and I do not know the mfg of it but found that most Metric parts fit it. Well all the bearings and seals were replaced except the upper feed shaft. I now have it apart and found out why it was leaking. The seal has...

Finally done! I replaced all the tines, seals, bearings and a new chain so it should be good for another 30 years. Never found out what make this tiller is. The replacement tines are 3/4" longer than original and 1/8" thicker. I got them at tillerblades.com for $3 each! What a deal. Just...

What is the recommended chain slack before taking out links for proper tension? Mine is kinda stretched and while I have it apart burning old tine bolts off I want to adjust the chain drive. Also , will this chain breaker work? Are any of the pins removable or are they marked...

I searched and found a few different types of forms but just put a few together to suit my needs. I have attached a copy to view, if anyone wants the pdf PM me with your email and I will shoot it to you. It is on word so you can make changes.

I have an older 4' rotary cutter and finally got the bolts cut off it to replace the main shaft seal. The blades are shot and need replacing. I am having trouble finding the right size blades and bolts. The PO welded the threads on the blade bolts and I had them torched off. The hole in the...

I bought this tiller a few months ago and finally got around to removing one of the tines to see what size they were and found this stamp on the metal. I looks like EUROZAPIA or EUROZAPHA and under that ITALY. Can any help with these? Thanks in advance. Also need help with the...

Finally got it all beck together and would like to thank all that answered my dumb questions as this was/is my first Orange tractor. thanks again, here are a couple pics of her all back together. I am waiting on a couple of bolts from dealer and a little orange paint on the front lift linkage...

I found the post a while back but now that I have my MMM back on I am looking for a way to raise the MMM and lock it in place raised and use the rear 3 pt lift so I don't have to take the MMM off everytime I use a rear attachment. Does anyone have any info on this or remember the thread???

I think I have found the problem with the rear flasher lights. It seems to be the flasher/relay part#34670=-33700 but dealer tells me it is discontiued and was $34 when available. What would be a replacement relay? It only has two wires, hot in and out. thanks.

If you have 150.00 to spend on a drill press what would you choose? Links or pics would be nice. I am in the market for one and Sears 10" model is backordered everywhere.

While trying to get mine apart to clean up the threads it was rusted solid and I twisted it off and broke it. If anyone has one of these reasonable please PM me with a price shipped to 37918. thank you. These may be the same on many models but I don't know which ones.

Got everything put back together and have ran the tractor for an hour or so now and got on the road in Hi and near full speed I am getting a very noticable wobble. I checked the tie rods and they seem ok, any other suggestions on the 4 wheel drive front end that I should look to replace or check?

As you all know I swapped D750 engines due to cracked head etc. The replacement engine runs great but has the fuel bypass return line on the foward injector instead of the rear on the original. Any reason for this? I think all the return line does is to put warm fuel back into tank for cold...

When removing my clutch fork I dropped it and therefore do not know which direction it goes in. Can someone look at the drawing and tell me if it goes in position A or B. I would say B but not sure. SD Vic, here is a diagram. You were talking about a rear sweep was it A or B? thanks to all.

What is the trick to replace the thowout bearing? I know it is pressed on but how do you get the assembly off to press off/on the new bearing? Do you have to remove the entire clutch rod assembly? Screw,spring,zerk,clutch rod,fork and then slide it foward through the seal? This is all I like...

Well I finally got two engines put together as one now and built a makeshift engine stand and bled the lines and it fired right up. I wanted to make sure there would be no rear seal leaks and everything looks good and it purrs like a kitten as they say. The manual states rpms at 2800 and this...

Where can I find online the parts manual for the RC54-71B manual. I need to get some pricing on the lift linkage. thanks.

Got the tractor split and removed the rear main seal cover to replace it while it was apart. Ordered the new RMS # 19215-04460 and popped the old one out. Got the new seal today and it is too large outside diameter and does not fit tight around the crank. Did this part change or something...