Search results

No picture but the numbers/letters on the female connector are "OD-ISOB" and "ACCUTEK".

Thanks for the response guys but unfortunately I still don't have the information I'm needing. What is the size/specification I would need to find a mating female coupling? Yes, I could go to my dealer and get the parts but previous experience has shown them to be highly overpriced and since...

This has probably been covered in the past but a search did not turn up anything so here goes. I have a four year old B2620 and those plastic covers for the male hydraulic ports are a joke to say the least. Is there such a thing as a metallic cap/cover that engages like the female hose connector...

Project-X: No bucket/FEL involved, just the snow blower hitch. Tool junkie: hydraulic drive wasn't a solution I had given much consideration. Looks like I need to review more closely, I'm starting to like your ideas!

The B2620 has two speeds for the mid PTO if I remember the manual correctly but will have to reverify that. Yes I agree there are not many uses for a front mounted sickle and under trees is my primary intended use. I will have to be very careful regarding hitting something in front of the sickle...

In retrospect I probably should have included a photo of what I am trying to accomplish. The snow blower hitch has a PTO drive line mounted in bearing blocks which should handle any loading. I need to figure out some sort of excentric link to handle the rotary to back and forth motion but what I...

For what it's worth on my B2620 if you leave the snow blower hitch mount on the tractor and hook up to the FEL the blower hitch will impact the hydraulic tubing on the FEL (Don't ask how I know this :mad:). Finally found an obscure note in one of the manuals warning about this. Kind of dumb...

Been toying with this idea for the past couple years and thinking about using our B2620 with the front snow blower mount and fabricating a "socket" to fit the hitch like on the blower. Problem I am having is trying to figure out how to change the rotary motion of the PTO to a back and forth...

Very interesting thread in spite of a bit of flame. As for potential mounting methods, would high strength magnets be worth considering? I have used this method on a few of my projects with very good success. In fact we have a few of those type magnets holding a calendar on to the fridge which...

Thanks RBA50! Wonder why Kubota doesn't make this known? I'll certainly look into it further as removing and reattaching the bucket is not a lot of fun. Thanks bandaidmd for the suggestion, I had considered welding the two forks together as you indicated but because of the difficulty with...

Thought I would post a few pictures of a set of forks I built for my tractor. I handle a fair amount of fire wood and saw logs and was getting tired of using a chain with the bucket to move them around and on to the sawmill deck. They are rather short on purpose so I would not pick up too much...

Thanks Guys, all good points/suggestions. I'm leaning toward draining the existing fluid and changing filters then return the majority of the fluid to the tractor leaving the bottom inch of fluid in the bucket and replacing with new to the correct level. Long term, we'll see if this is a viable...

I recently pressure washed my B2620 and later discovered the hydraulic fill plug behind the seat was missing (found it on the ground after I moved the tractor). Should I be concerned about water in the hydraulics, do the filters capture water and are there any indications (sounds) that would...

Skeets, Thats pretty much the same response I received from my dealer except I have a "cheap" grease gun. They told me to unscrew the fitting on the end of the grease gun hose a couple turns which was supposed to loosen the grip on the zerk. Didn't help! I'm kind of inclined to agree with Eric...

Did a search before this post but did not find anything related to my Zerk problem. My 60 inch MMM has plastic anti-scalp/bogie wheels with "pressed in" grease fittings and everytime I try to grease them the Zerks pull out when I try to remove the grease gun hose. Doesn't make any sense to push...

Newbie to this forum with a question for the group; I have a B2620 with a LA364 loader and B2781 Snowblower and recently damaged one of the hydraulic lines on the loader due to a lack of clearance with the B2733 front hitch used with the snowblower. It seems that Kubota did not consider the...