Search results

Thank you Flintnapper for the info, I greatly appreciate it. I have a greater understanding of what I'm looking at.

I will take another crack at this, thank you for your feedback. The wsm specifies each finger be within .012 of eachother.

because I did not know what I was looking at. The diagram is only a partial and I wasn't sure what I was looking at. I am not a mechanic. I can not afford a new tractor and I don't have the money to pay a tractor mechanic to repair my tractor. I am not totally incompetent, I can rebuild a...

I put Brotec 2 inch spacers on my ‘85 L225 because the new tires were wider and made contact with the frame. Brotec is in Canada, there is also a US company called Bora that sells spacers too.

I adjusted the clutch fingers per the wsm, now it doesn’t go into gear at all. I have obviously done something wrong. I think I am looking at the wrong part of the assembly. Where do I measure the fiNiger clearance? I’ve attached a picture with an arrow indicating where I measured clearance...

I have a bush hog I haven’t been able to use much because of a missing sway chain that should be in soon, it’s on order. I’ll check that vent tube.

Sorry, I meant L225. I don’t know how to edit the post.

I will check that, thank you. I’m not afraid to split the tractor after I procure manuals and rebuild parts.

I believe it’s because the beet juice will cause the tires to expand width wise just a bit. That’s what happened when I bought new R4’s and loaded them with beet juice. The tires expanded and made contact with the frame. I ordered 2 - 2” spacers from Bro-Tec and that solved the problem and...

I have a 1985 Kubota L225 with a Freeman 1000 FEL and loaded tires. When I am in Low 1st or 2nd gear I have no issue, Low reverse sometimes when I let off the clutch the tractor does not move. The engine is running at 2000 or 2500 RPM, I can raise and lower the bucket and 3pt arms but the...

I have an ‘85 L225 w/FEL. I just replaced the original rear tires with new Carlyle F3 tires loaded with rim Guard. My tires are now a bit wider and contact the frame so now I need 2“ spacers.

I need spacers because my new tires are contacting the frame on my ‘85 L225