Search results

Hi all: Just finished one for an L39. It consists of a 1"x3"in frame attached at the top of the Rops/Fops just below the lights. With another around the mid level, at the top of the hood/fenders. In the first instance two years ago I used Dollar Store plastic tablecloths. reinforced with...

Hi: I found that Canadian TSC Chalmers Orange is an almost perfect match on a 2006 L39 guess you'd call that a New Kubota Matches so close I can spot paint scratches and the color difference doesn't show Hari.K

One technique using the bulldozer, or FEL , is to backdrag the blade across the area you want to smooth, with the blade just sitting loosely on the ground. This knocks the top off of the high spots and deposits them in the holes. Even eliminates the machine's tracks. HariK

ChalmersOrange2299 matches paint on an 06L39tlb so I guess that's the later variety. HariK

Go to Tractor Supply Co., and get some Implement Paint, Chalmers Orange Number 2299. It's a perfect match for Kubota. So perfect that I can paint spots in the middle of a panel without being obvious, less obvious than the proper Kubota spray bomb. I got a quart last spring, it was so good I had...

In this thread: http://www.orangetractortalks.com/forums/showthread.php?t=276 We've been discussing drivetrain noise , among other things, on a slightly larger machine You might want to do some of our tests and compare results Hari.K

Don't know if you guys have TSC out there, but they have a Farm Implement Enamel by Serif Coatings of Mississauga Ont. Number 2299, Chalmers Orange is a perfect match for Kubota Hari.K

One more quick question At the bottom of the switch (auto level) travel there seems to be a stop a small plate inside the box held in place by two screws In the lower position does the switch touch the stop? On mine there's about 1/4 in showing through the slot in which the switch moves...

Hi cabu. Here's a translation of the labels on the panel My friend does not know tractors, so I think Monro=Hitch hope this is some help ========================================================= Left = Auto-Oil Pressure Lifter (Upper-side for Lowering...

Thanks Ed. I wont't go there. Sgrol I think I'm getting closer. The prob seems to be stupid operator. My self levelling lever seems to have three positions up is off one down is the proper self levelling function, which I'm glad to have found at last. third is this wierd half levelling...

Hi Sgrol: Noticed today that the 4wd lever was also vibrating in time to the vibration I was hearing, even grabbed onto it to assure myself. So I did some more searching and found this: http://www.cornejo.net/rtv900/DriveShaftRattleFix.htm Not sure I want to go to this length to shut the...

Always wondered what I could ever use forks for. You guys have convinced me, very useful addition. Hari.K

Hi: The sympathetic noise seems to be coming from the lower part of the right engine panel(left as you sit on the seat). I'll take it off and see what that sounds like, might be as simple as a rubber bumper. On the FEL I've come to the opinion that the Shop Foreman and the regional KTech are...

Hi There Wehlmer: Why not try this: Take a piece of cardboard, smear the end of the PTO shaft with grease, then tap the cardboard into it with a rubber mallet, so you've got an impression of the end of the pto shaft on the cardboard. Then do the same for the stub shaft on the mower. Then...

Good day Sgrol: Here’s my observations on driving the Kubota L39 It’s like a king size baby carriage on steroids. With the short wheelbase, sensitive power steering and overhanging weight front and back If I had to move it any distance I would trailer it, for which I have already prepared...

I've seen a number of these this year, mainly from Southern Ontario. Your approach is the best. Got to check the registry office for leins though, he may not really own it. I expect they're looking for someone who won't come and look. On the other hand I have a friend who bought an antique MG...

Good day Sgrol: I too am an owner of a new to me l39, it's a 2006 so I think our machines are pretty much the same. It's so new to me that it hasn't arrived here at the farm yet. When it does I'll give it a test as you describe and tell you what I hear. Now I've got a wierd prob with the...