Search results

Thanks! Really appreciate the quick help.

Thanks for the quick reply! It's a Wheatheart Heavy Hitter pounder. Looks like tongue weight shouldnt be huge...

I'm looking to rent a trailer mounted post pounder this weekend, to do some fencing on my level yard. The trailer is spec'd to weight almost 3,000lbs. Do you think I'd be able to pull this with the B1700?

Thanks for all of the replies! One last dumb question.... If I used a similar sized cylinder to the loader cylinders (i believe they are 1.5"), wouldn't the operation be the same speed as the loader (if the loader hydraulics were disconnected from the pump)?

Hi All. I just bought a B1700, and tried searching for a log splitter setup for it. I was wondering if it would be possible to use a cylinder (close to same size as the loader cylinder), and run it off of the loader control somehow. Sorry if this is a dumb question, but I'm by no means, a...

Hey everyone. I just brought home a B1700 and can't find an Operator's manual for it anywhere on line. With colder weather coming up, I'm just wondering what Kubota recommends for glow plug cycle time before starting. Anyone with insight on the matter? Thanks in advance!

I think that's why this guy put a VW motor in it. He was saying that it was way too much money to put another Perkins in it. It's just awkward operating a skid steer with the VW motor in it, because you always need to be adjusting the throttle....

I'm looking to get a replacement motor for my Bobcat 825. The motor that is currently in it, is from a Volkswagen Rabbit... Needless to say, it doesn't work the way it should, so I'm on the hunt for something better.

Thanks guys! P.S, Good one bcp! haha

Thanks for all of the help guys. As Wolfman requested, here is a picutre of the valve. The bucket stick is on the inside (closest to the seat).

Hi All. I have my first tractor (B7100), and have a dumb question. The way the loader valving is set up, the float function is on the bucket curl stick, and not the lever that controls the lift (or arms) of the loader. Is this the proper setup, or should it be the other way around? I'm thinking...

I have a fairly new-to-me 1980 B7100D and just put the first few hours on it this weekend. I was doing dirtwork, so there was a lot of shifting between reverse and 1st gear. The tractor ran/shifted fairly well for the whole day, and when I went to put it in the garage at the end of the day, I...

Perfect. Thanks All!

One more question I have, after looking at the wheel again... Will I also need to unbolt the center hub and turn it around? Seems like if I just flip the wheel around, there won't be much or the collar holding it onto the shaft. Sorry if this is a dumb question, or if it plain just doesn't make...

Not sure on that one.... Looks like I've taken on a few "mysteries" when I bought this machine.... So just to make sure I get it right, I just need to remove the wheels and flip them around and re-install on the axle?

I've got a 1980 B7100, and was doing some work with it for the first time yesterday. I was lifting things with the FEL, and noticed the back end of the tractor was a little unstable. I'm not familiar with these tractors, as this is my first machine that I've owned, but I'm just wondering if this...

I'm wanting to install a temperature gauge on my '80 B7100. I've bought the in-line fitting to attach an analog gauge to the rad. hose. Is there anyone out there that has installed a 2" gauge in the dash panel somehow? I've attached a photo of the dash on my unit. I'd like to install in the dash...

I've for a KMW K80 loader on my B7100 (geared). The valve was leaking pretty badly from most of the fittings that connect the hoses to it, so I replaced all of them with brand new. Would you be able to let me know if I need to purge the system in any way, after I hook up all of the fittings, or...

Hi All. I'm looking at getting a 3 point finishing mower for my kubota B7100. I found a great deal on a good Woods RM59, and I saw that the front shaft needs to be a certain length for a Kubota tractor (or any other smaller tractor). The seller of the mower said that it was used on an...

Hi All. I've just bought my first Kubota. It's a 1980 B7100 (geared drive), 4x4 with FEL. I'm wanting to buy a finish mower for it, and have found a good deal on a 60" Woods model RM59 that is veritcal belt driven off of the shaft. Will my tractor run this mower alright? Any advice would be...