Search results

I have a B1750 with power steering, with around 1300 hours, I have excessive play in the steering wheel, I can turn the steering wheel 1/4 turn before front tires move. Is there a way to adjust this out? Or is something worn out?

Thanks never knew that, and yes they are flat not domed

Think i might try these, they have the flat head and they are the right size. Took me a while to find them. https://www.ruralking.com/cutting-edge-bolt-set-pk-9

Was looking at the plow bolts as well, might have to use these, these have a dome head instead of the flat head. Yeah its basically a carraige bolt, but the one on the box blade have a flat head instead of a dome one. A carraige/plow bolt will work, but was looking for the flat head bolt...

Im changing the blades on my Rhino B48 box blade, and need a couple of the bolts that hold on the blade, they are a bolt that has a square shoulder and a flat round head, i have searched but have had no luck. Im sure that any square shoulder bolt would work and does not have to be a Rhino bolt...

My loader has been leaking down for some time now, with bucket raised, loader will leak down 3 inches within 30 min, not sure what the spec from Kabota is. What i would like to find out is, is it the loader lift cylinders or the control valve? I have read, not Kubota specific, that you can...

When I bought my B1750 it did the same thing, trying to get a good reading on the dip stick was hard. I use a pipe cleaner to measure the fluid and cross reference it with the dip stick, I found that my oil was overfilled, cant remember how much. Once I drained some fluid out all was good.

Re: Parts (hoses) Kabota or generic Ok this sounds good, never thought about asking the hydralic shop, now I know what the house is called (suction & return)

Re: Parts (hoses) Kabota or generic These hoses are just couplers, they are held on my regular hose clamps, about 3 inches long. Not your regular hydraulic lines to your implements with a fitting on the end. Here is the link where I can buy them, but holy smokes they are expensive...

Thank you very much!!

New at tractor ownership, I have a B1750, just curious if the PTO should be in neutral if I am not using it, looked in the operators manual, but does not say.

I bought a B1750, that needs some replacement hydraulic hoses, not the ones for the FEL, but the small ones that connect 2 metal hydraulic lines together, for the hydraulic oil cooler. These are expensive pieces of rubber, just wanted to know are these a special diameter, or can I get this hose...