Search results

I dropped the frame and the forks off at the neighborhood welder who will straighten the forks and weld the gooseneck to the frame with reinforcement for $125. New parts would start at that for the frame only and the cutter is 12 years old about six acres 1-3 times a year, so I might get 12 more...

Rookie move back up with brush hog down. Can I still use a 5' rotary cutter with no wheel on the back without harm to the tractor L3400? Thank you.

I did not know the clutch of the mower was bolted on so the drive shaft separated for the mower. I found the bolt, but the clutch end of the drive shaft did not want to slide back on the mower end. Do I? Detach the clutch from drive shaft and bang it on and hope I can line up the holes that...

I have 336 hours on a ten year old Kubota L3400. For the third time in the last two years I ran a front tire off the rim. The first time, easy remount. Next time, other tire easy remount with new valve stem. Today, first tire goes off over a little stump strong turn and a wire is sticking out of...

The PTO grinds on my L3400. I just tightened the cable all the way and it went from mild grind to heavy grind with a slight turning of the PTO. Do you think replacing the cable is the next step? Thank you.

I am pretty lame with a wrench. Should I go to a Kubota dealer?

https://www.youtube.com/watch?v=GBwdnB5pGds Here is the sound video. The PTO lever is in the engaged (on) position.

Help please.I think this is a PTO lever adjustment issue. The PTO will engage (with some grinding) only if I push the lever forward some and even then it won't stay engaged. It looks like it could be adjusted below the lever. I don't know if I want to raise or lower the part with threads that...

I always had tractor running at full PTO speed when I put the PTO in gear. I would do everything at full PTO throttle. I now know better. Could this rough use be causing it to grind when I put the PTO in gear or when I let the clutch out?

Thank you! I will go to the cable next. I appreciate the reply.

It is HST. Do you mean the PTO lever cable? If so, how do you adjust it. Thank you!

When engaging the PTO on my Kubota L3400, I get a grinding sound. It does not matter if the attachment (mower) is attached or not, it still grinds. Can you help me figure out what to do? After doing a little research, I did this and: I adjusted the freeplay of the clutch pedal. I can get the...