Search results

Yep

Got mine yesterday and just got them on today. Perfect fit and they look fantastic. Thanks Ken.

Well by golly it does....all these years I put both in neutral. Learn something new every day.

If its not turning over, put the transmission in neutral and shift selector in neutral and see if it will turn over or start. This bypasses all the safety switches except the pto.

Thanks Ken. I knew that casting was part of the system. I wondered about that gasket or a pinhole in the casting. From your picture it looks like the water is coming somewhere around that bottom middle hole just to the left of the radiator hose. I will probably remove the dynamo and...

Hose was a braided type hose put on buy the previous owner. I've had the tractor 8 years. That hose was not a formed hose and split where it bent going into the motor. Did not run hot. The dynamo is behind the fan. No water pump.

New model hst.... Cutting grass and busted a lower radiator hose. Parked it, drained radiator (about 3/4 gal left), ordered a new radiator hose. Had a small leak on the pipes from the fuel pump, ordered the o rings and washers for that. Replaced those and the radiator hose, bleed the system...

Tiller

Just got through putting up 189 ears of sweet corn. More to pull later. 2 bushels of Kentucky wonder beans canned. 15 pints of hot dill pickles. Waiting on the butter peas and tomatoes. Last count had 67 cantaloupe in various stages. Plenty of hot peppers, bell peppers, and onions. Life...

Mine stays down.....

Seat switch maybe?

No, it's two separate pieces.

First thing I did to mine......but I went all the way to the bottom.

It actually 26x26x30.

I can't remember the exact dimension, but 2x2x3 I think. Held 12 bags of quikcret. I couldn't get the local cement company to pour it, even taking it to their business. Said I would have to order 1 yard of concrete. Asked about trucks coming back, what do you do with left over concrete. Said...

Easy to build, 980 pounds.

This....980 pounds. Really makes a big difference.

A little welding and some steel mesh.......

Bravo sir. Thank you, your son and his family for their service.

Before you add the hydro oil, change the filter. Using a shop vac, you'll not lose much oil. Search on here to see how it's done. Be sure when you take the filter off the magnetic ring comes off with it. Make sure what you're seeing in the sight glass is not overfull oil. Sometimes it's...