Search results

Have a 2016 L2501 2wd gear tractor. When mowing or moving even with heavy stuff attatched......pressing on the clutch gives a quick stop...almost like braking. The brakes have plenty of slack and are not dragging. I have checked each side and they brake as they should. On a flat cement surface...

My 2501 acts like the brakes are dragging. When moving and I depress the clutch, the tractor stops immediately. On flat cement...I cannot shove it at all manually. The brakes work great. I have the linkages backed off quite a bit , but it has made no difference. Nothing heats up that I can...

I have a 2016 L2501 2WD. On the front axle pivot there is no grease fitting...only a plug on the rear part. The front consists of the adjustment bolts. Can't find any info on this. Should I remove the plug and attempt to grease ? Wonder why a fitting is not there? It is a big pivot point and...

Howdy. Does anyone have the part # for the tach/hourmeter cable ? I am searching for one online and not having much luck. This part needed for a L2501. Thank you, Pete

Howdy I want to weld a hook onto my bucket. If I hook ground very near to weld area...is there any reason to unhook anything electrical on the machine? Stick welder. Thanks Pete

Anybody running a BK 976 backhoe ? How do you like it?:o

I have my new backhoe and it is not a BH 77 as I thought was coming. It is an Ansung BK 976. The manual even says run it with loaded tires and keep them on the ground. 16" bucket measures 15" (new math I guess) Looks like it is a strong little thing. Swing levers are hard to get moving. Guess...

I am getting a backhoe for my tractor. What model of backhoe will I be getting? It's to fit a new L2501. It is to be hooked up to the frame. Where on the frame ? There ain't much frame on this thing. Could they be meaning the drawbar slots....the top link slots and the lift arm slots...

Got a L2501DT and for the second time a front tire has gone flat for no reason. I had plenty pressure.....42 psig in both. This time the right front was flat when I needed to use the tractor to pull a guy out of the ditch.... anyways...…fed up with it so took 'em both to the shop and had tubes...

Trying to find where the vent is for my transmission-gearing on my standard geared tractor. Is there an obvious vent anywhere on this tractor ? Thanks for any tips on it. Pete

Thinking about getting a backhoe. On an L2501, how much rotation will one have? Will it go from full left to full right....180 degrees ?? Do all models with backhoes have about the same rotation ?;) Thanks for any insight. Pete

Hope this is the correct place for this question....going to look at a L2501 and we don't know year made. Is there a key to this in the serial # prefix ? Also...when did the current body style of these tractors begin? The swept back looking hood with the sleek headlites ???? Thank you - Pete

First oil change on my L 2501. Book calls for 6 qts . I put in 5 1/2 qts and installed a new filter. I am now overfull about 1/4" on dipstick. Is the book right or the dipstick ??? Thanks for any insight. Pete:confused:

Anyone got any idea of the nut size on the blades of this rotary cutter? I want to take the blades off at some point to balance. It's a big ole nut !!! Thanks, Pete

Hi. Is there a dashboard or something where I can change my preferences to get black lettering on the forums instead of the hard to read red ??? I am having a little problem reading the red when black would be so nice and easy !!!!!!!!! I have looked for a way to change how I get the forums, but...

I have the manual transmission with a sightglass. After tractor is warmed up, the fluid looks like a vanilla milkshake and bubbles are rising in it. Little bubbles but quite a few. Shut down the tractor and bubbles stop. Is this normal ? Thanks , Pete:confused:

Can anyone tell me where the oil pressure sensor is located on the engine of a L3301 or L3901 ? I am curious and can't find it. Thank you, Pete;)

I guess my mower has lift blades. Bush hogging is a dirty mess here. Every time I cross my gravel driveway or a place under trees with not a lot of grass, I end up in a cloud of dirt/dust. I have never experienced anything like it. I use the leaf blower on the tractor after working and also use...

My 3 point control lever is about twice as hard to move as I feel it should be. Any tips or pointers on how to make it easier to operate ? Thanks, Pete:)

I am wondering if the fan can be reversed ... to blow air thru the radiator out the front of the tractor ? It would sure make this thing more bearable in the heat. I am about medium well done right now...ha ha. I used to have a Komatsu that had a reversible fan. That was really nice. Thanks...