Search results

Where in Ky is your location and could one come look at parts available? I would be interested in B2400 HST parts and FEL also. You can reply here or txt to 270-559-8870. Thx

Looking for a hood or bonnett for B2400. Used is fine with no dents. I will repaint anyway. Include pic if one is available.

My B2400 is difficult to shift out of 4wd at times. I have founf if I back up a few feet it is much easier. Maybe this will help. Reduces the torque windup condition and gives some slack. Sometimes I dont even need clutch.

You might want to measure voltage with engine off, then with it running. Voltage should be >13 when running, if not there is an issue with the charging circuit. If it checks out then the dirt as mentioned, or faulty connection could be the problem. The battery even tho it is only a year old...

Thanks guys for the tip on the hypoid lube. I have just always used the UDT as that is what came in it. Just nice to use the same fluid for both ends. The spring in the seal has always been there in the old one just like the new one. Im not seeing the bearings that you refer to in the area of...

My 2400 HST with front assist has a chronic leak at the driveshaft axle junction. I have replaced the seal several times and all o-rings. None of the seals have ever looked bad? The leak started early @ around 250 hrs n now has 1200 hrs on machine. It was out of warranty when leak first...

When spreading dirt or gravel when I get to the finish part I have found that if I get the box full of material, then one can use the weight of material to fill in with. Just raise your box to whatever height you want to leave. This wil finish up surface really nice Ken Remember, when...