Search results

Thanks for the replies! I am looking around for used parts but these are really hard to come by since they have been discontinued so I haven't had much luck. Good tip on the machine shop, I'll give that a try! Dave

Hi All! Last weekend my steering went on my B6200 and when I tore it down the steering shaft nut (where the bearings are) tubes were bent and all of the ball bearings ended up in the bottom of the casing :). Even worse, there are no replacement parts available any longer and I have not been...

Hi Stanley, Thanks for the reply ... unfortunately in my haste to get the job done I never checked it before the rebuild (my issue was with leaks and not how it was functioning). However, I believe you are right that with a good seal it should be tight ... I am interested to see what yours...

Hi All, I was wondering if someone could help me with a potentially "stupid" question :rolleyes:. I recently re-built the hydraulic pump on my B6200 (all new O-Rings etc) and when i put it all back together I could turn it by hand but it was very stiff, hard to turn but there was no grinding...

Thanks Butch ... it worked great!

Thanks Butch!! I will give that a go ... makes perfect sense :)

Hi All! I have noticed some hydraulic fluid leaking out at the Hydraulic pump where the hydraulic block connects and will be fixing it this weekend. And, since I need to take it apart to fix that, I figured I would pull the pump also and replace the O-rings and oil seal while I am at it...

Hi Jack, Congrats on your Kubota ... you'll love it! I have a B6200 that was doing the same thing with a slow dropping of the 3Pth over time (I left it up one time and in about a week it dropped to the bottom). I replaced the O-ring on the piston for the 3Pth and now it is fine and doesn't...

Dusty ... just wanted to let you know that I worked the tractor for 3 hours today and everything is fine now ... no overflow and no bubbles :). Really appreciate the help!!

Dusty ... right where you said it would be ... I would have searched for a year before I ever found it :(. I really appreciate your help!! It was completely gunked up so I am hoping that resolves the issue ... I'm out to do some work and see if that fixed it. Dave

Thanks Dusty ... I'll have a look!!

Hi All, This is my first time posting although I have been a enjoying this site and the information for some time!! I was hoping that one of the great posters on this site could help me out with a problem :). I have a B6200 HST (2WD) and have a problem with the hydraulic fluid overflowing...