Search results

Well... That blows! Everything on the top plate is brand new. I left an implement on it and it didn't leak down over night. For all intents and purposes it feels like its lifting up, then drops down. not dropping down and lifting up. I guess it could be a matter of perspective on where you come...

Do I need to pull the top plate and adjust the cam that controls the hydraulic valves? Or are you suggesting its a seal problem? I'll admit that portion of the shop manual that described how to set the cam was confusing.

I don't know if I'm describing this right or not but I'll try. I rescued a L3600-GST from a dealership that had been stripped and rebuilt it last year. Here's the thread with some background. Basically I rebuilt the 3-Point/top plate. When I use the three point to lift stuff, mower attachments...

Thank you good sir. Ordered them from messicks

Sorry, I are dumb... not sure what the part is called.... maybe that's why I can't find one on the internet... searching the wrong term.. What the part called? :confused:

yea, the LH side is static and RH side is adjustable.

That's the problem I'm running into... I don't have the old ones, so I'm not sure the size.

Anybody know where to find these after market and affordable? The factory replacements are 250 more than a complete aftermarket kit. They're going on a Kubota L3600. Factory Part Numbers 31351-71540, left hand 35070-71560, right hand

Anybody had to fix a propeller shaft seal? Can I just separate the tractor at the bell housing and fix it from the clutch side or do I need to separate the transmission from the mid case? I had the whole mid case out and was fixing the hydraulic clutch (GST) type and apparently knocked the...

Looks like I'm not so lucky, they discontinued my 600$ clutch. The new clutch is 1000$. Let you know what happens. Thanks for the help so far.

the whole clutch assembly is 600$. The retainer and spring costs about 120$. I figure since the tractor needs split I should just throw a whole new assembly in it

The clutch is blown.

Yea, its weird alright. I read another article and it turned out be the keeper for the wet clutch failed, the pack had separated and the pressure was pouring through the clutch assembly. I just, I don't want to tear the thing apart without an objective. Thanks for looking Wolfman

I went back through the system with the tester and it looks like the hydraulic system is working. I took a picture of the Hydraulic Circuit and diagram'd it out in MS Paint and attached a copy of it. My pressure readings are listed and I drew a blue line the "way i think" the flow is going...

I got the three point working, the valves need tuned. Who'd uh thunk..... So here's what I gather from the book. The Hydraulic pump is actually two pumps in one, at least that's how the diagram seems to read, two set of gears etc. They're divided into two systems, the Hydraulic side and the...

I pulled the pickup tube and verified its clear of obstructions, There's no pre-screen in the system either. But sounds good though, I'll check back in a week. Thanks for your helps so far. I'll let you know what I find.

Okay, Cool~ Next question, where do I hook it up and what kind of pressures am I looking for? Thanks Again, BTW.

Hey, Thanks for the reply. Can you look over my cart, make sure this is what I need. http://www.amazon.com/gp/registry/wishlist/3R0HCFASJQ5VQ/ref=cm_wl_rlist_go_o

Okay, This isn't really a new problem as much as a.... assembling for the first time problem. A little back story, I bought this L3600 GST that was partially disassembled by some nose candy loving meth head. Basically the owner found the tractor being stripped, took it to the local Kubota shop...

I'm looking for some salvage parts for my L3600GST, mainly the dash assembly. Part Name--------Part Number-----------Xref Models Panel Assembly---TA040-30210----------L4200, L3300 Bonnet-----------34070-43010----------L4310, L4200, L3300 Cover------------34070-43032----------L4310, L4200, L3300...