Search results

Thanks for the tip on the harness. The camera is simply for capturing action with and near the tractor. For my amusememt.

I'd like to install a Blackvue dash cam on the roll over bar of this tractor. Anyone have ideas about where to tap into the 12v system? Or ideas in general about doing this sort of thing? I would also consider installing the outlet for a cigarette lighter in which I could plug the OEM...

Anything out there? If not used how about a recommendation for a winter cab. Thanks Steve

Thanks Mike. You and my wife were totally correct. The Yellow and Orange IDs, when covered with dusty oil look pretty much the same.... Again, many thanks. Steve

B 26/20... 2013 very low time. Now my tale of woe: Today, after hearing a weather forecast for snow, I removed the FEL and hung the plow. The plow wouldn't move at all... After checking the hose hook-ups and finding no problems in that area. I moved the control lever thru all of it's...

ditto :) On a B2620... 54" boxblade

Thanks to all of you... The crux of the whole problem is that the front edge of the loader is too short.. The FEL has the guts to tilt it up, i'm sure. I think I'll drive a chain under it, wrap it around and use another chain to lift the back edge, brick that up, lower the rock, rehook at the...

Here y'go. This stone was placed by me 48 years ago. As you can see, it's settled a bit...

..flat stone which is acting as a doorstep... but needs to be higher. Only access is from straight on... the stone is wider than my lift bucket. My thought is to use a stone and crowbar to lever it up... weight is to be the downthrust of the bucket. Then shove a few bricks under and as far...