Search results

Does anyone have personal experience to give a definitive answer to what it means when coolant seeps from the Weep Hole behind the Inj Pump? Thanks, K-Mo

Can anyone identify the number of the "Creep Kit" for my L2850? I have the Operator's Manual (32430-9877-1) and Installation Manual (32430-9876-1) for the Creep Kit, but nothing to identify the kit. The manual titles state, "Creep Kit for Kubota Models L2250, L2550, L2850". I emailed KUBOTA...

The Draft Control linkage to the valve is broken off which got me to taking a closer look. Don't know how or why it would be broken. I can move the top link plate at the linkage connection about 1/16" of an inch. I don't know how sensitive the Draft Control Valve is, but would this "slop" affect...

The key cutoff did not function on my L2850. Repaired with an external relay. See Attachment. KMo

Has anyone made this adapter? I assume it would be thread for an 1/8" Female Pipe Thread. I'll have to check about hose pressure spec, but thinking of using a grease gun hose.

I want to mount a Snow Blower on My L225. However, I don't have the electric clutch PTO assembly that drives off the front of the crankshaft. I can fabricate everything but the splined coupler. Does anyone know of a source for the splined coupler? Or, a complete front PTO unit? Thanks, K-Mo

It's my under standing the weep holes are part of the crankcase ventilation and I can understand condensation weeping from the holes. I had been loosing some antifreeze from the weep holes and put some magic stop leak stuff in the radiator. I also re-torqued the head and found one nut a little...

I would like to install a freeze plug heater in my L260 w/Z1300 Engine. The freeze plugs line up with the cylinders and I don't know if there is enough clearance to install a freeze plug heater. The freeze plug application references don't list the Z1300. I talked to the "KAT'S" people and they...

Apparently the 32240-37713 Hydraulic Filter for the L260P is no longer available. Does anyone know of a suitable replacement? Thanks, KMo

I'm new to Kubota and found and old L260 with a Z1300 engine to study. Great tractor, runs great but is extremely noisy. While searching the internet, I found that a Kubota owner that had torn an engine down for a knock and found no problem. I have listened to a few youtube videos of the L260...

There is a lot of discussion about engine RPM. What am I missing? I have been around tractors all my life. I was an IH mechanic in the late '60s. I have tested tractors on a dynamometer. In general tractors have a specified full throttle No Load RPM and a Full Load RPM. In general, a tractor...

Need to rebuild a L260P Water Pump. All information I find says to just press the shaft through the impeller to remove. However, I'm concerned about breaking the pump housing. There seal flange housing looks a little too fragile to press against. Looks like my options are. Just do it and hope...