Search results

Because it is diesel and hydraulic, is it possible to increase the horse power slightly ie. the pressure? Thanks for the help with this one request.

Two plates are bolted to the space above the bucket and a receiver welded to the outside plate for the hitch tube and ball. Then the trailer can be positioned where needed and tongue LIFTED to dump the flat deck or utility box out. Note use a smaller ball then the hitch on the trailer to allow...

ok will try again with my new resized pixs

with a picture he may like

http://www.cheknews.ca/tractor-parade-popular-cowichan-valley-farmer-348763/ He did not have a driver's license but drove his tractor everywhere.

From an earlier tread, for the new owners. Here are two of the easiest mod to do on a small tractor. First every morning when I go out to the rig-a-dig the BH stabilizers have settle a bit and this is normal on hydraulics, but unsettling if you forget and barely clear the door frame. So took...

copied this from an old tread, hope the pictures come through. Hi Folks, here are five in progress pictures of the new forks for the FEL. First pictures shows dealer installed W.R. Long Inc. wear bar (good investment, saw a bucket without one and looked like 50 years of use in only 5 years)...

Welcome to the BX world. Had mine for a couple of years now, and yes the fuel gauge will take a little getting use to, I’m in and out of excavations so notice that the gauge will fluctuate noticeably as you move up and down grades, however sitting level for a minute will show the true reading...

Hi folks, Paul posted and interesting video on HST stopping issues and Coyote Rod posted a video on this same problem and possible solution. Are there any comments, concerns, solutions or discussions on this important issue?:confused: Thanks for any input you may provide. and mine does not...

It took longer to sign the postal slip, unwrap them, then it did to remove OEM turn buckles and install the new stabilizers. They work great.

just a little side step

Picked up a freight damaged inexpensive steel 3’ x 4’ carry all at the local dealer and cut the rear carry all portion off leaving 4” of base frame and the 3 pt frame. Picked up what I call sea water new/old steel at local demo yard. Looked like it had been in the salt chuck for a decade as the...

Added a set for skid plates to that very vulnerable under carriage of the BX25D. All that exposed rigging under there made me nervous. The plates when on easy, the hardest part was taking off the little OEM plate, as the bolts are rammed on by machine then painted over and stuck in a finger...

Added a set of 3” rear wheel spacers to the BX25D today. First picture shows the original hub, second picture the new spacer. Note you will need both ¾” and 13/16” sockets for existing and new bolts. Do torque and check properly as it is high grade aluminium to steel. Next picture the install...

Here are two of the easiest mod to do on a small tractor. First every morning when I go out to the rig-a-dig the BH stabilizers have settle a bit and this is normal on hydraulics, but unsettling if you forget and barely clear the door frame. So took two length of 3/8” polypropylene rope made a...

and have a safe and happy long weekend to our good neighbours.:)

Good Morning, Couple of questions regarding the Easy Checker Instrument Panel indicator lamps on the 2013 BX25D: 1) Immediately to the left of the Preheat indicator lamp is what appears to be a "head light" symbol, it never comes on, what function does it indicate? 2) Immediately...