Recent content by Woodsie

Appreciate the feedback guys. I am a weldor by trade but it’s the whole time thing. Too many projos in line to fab something up. Gonna keep lookin because, hey, you nevah know ..

I got use a neighbors BX18. Had a FEL on it. I absolutely need one. I have a B7100D with the 4way blade and an aftermarket BH. The whole setup works for me and I work it a lot. Well a lot for a city dweller on a big lot. Digging stumps and planting trees, plowing snow (after that humdinger back...

hey F250SD, I have a factory Kubota from mount complete snowthrower for a B7100. Perfect mechanical working order, I even have a Kevlar belt for it. would include pulley, blower, belt, lift cyl (you would need some hoses made) $800 firm, send me a PM and I could send some pics. I ship lots of...

I graded around the new garage with the dozer blade, filled in some holes with the backhoe and a wheel barrel. got a ton of coal. Greased everything and topped off the fuel, storm comin. Gonna be heavy and wet. We're ready :-)

Got a Husqy Rancher 55 w/20” bar and an Echo CS590 w/24” bar. I’ve had the Husqy for over 20yrs runs good but I did hone and re ring it. The Echo is only a couple yrs old. I like the Husqy because she’s loud and got some aftermarket tweaks the echo is unmolested but prob not for long. Am...

Got a snowcaster from a late 70's b7100d. I have a dozer blade on there now and really have no use for the blower. it will be the front PTO and the 2way piston included in the sale but NOT the hyd controls, hoses or tower that bolts to the subframe. will have all nut/bolts/washers as well...

wolfman, its a gear trans. N3BP, i'll give that a shot, looks like a another 6" coming tonight. be great if that grease would quiet things down. thanks!

bout 4 months ago, I bought a late 70's (I think-haven't run the numbers because, it doesn't really matter) B7100D gear. wow, I cannot get over how much work this thing can do. came with the Snowcaster off front PTO for a song. but, just recently(mean like last week)I acquired the dozer...

Hola, Got a 7100D that is a little noisy when clutch is engaged. Doesn;t sound grumbly during disengagement, kind of like a;grounnnnchinnng noise when engaging a gear or PTO speed. Is there a chance I;d be able to get some grease On the pilot bushing/bearing without having to split the tractor...

Wolfman Yeah, I now no what I did wrong. Thanks for the diagrams ..I had it hooked like a three way but do have the ability for 4way with the same valve. Mistakes often are the only way to solutions. I've got the pump off, am going to make a template on a 1/4" plate so I can bolt the pump to...

I got most of the info. I guess a better question would be; can I get the just the hyd pump housing (only) and swap guts. part# 67211-76100. I am going to pull out what I got, dig the crack out and weld it. But, welding cast alum sucks to say the least ..

First post so, Hello and good morning Got a 1980ish B7100 I had purchased from a grandson of the original owner from Maine. Machine used only for snow throwing at the farm. But yet, control valve and hoses missing, although the snow thrower is intact, including V-belt. So yesterday, I had some...