Recent content by Ugly

I'm not to crazy about cutting the pto shaft off that much so does anyone have a suggestion as to where to get a quick hitch reseasonable or should I build one?

I purchased a new king kutter tiller last fall, model #TG-48-XB-OK and would like to put it on the back off my BX 22 but the pto shaft is about six inches to long. Do I need a custom quick hitch or cut the shaft off? Any suggestions would be appreciated. The landpride was not suggested by my...

Sorry I cant help on the bucket but would like to know where and how you like your 8" bucket. I have a project and would like one, but I only have a 12". Thanks

I actually took the pin out of the QA and found no hole or grease zerk in the cylinder and or the pin in the QA/bucket so I have to believe someone switched the pin, but I don't know why but I bought the tractor used last December and used the blower all winter but it is time to use the loader...

Thanks alot 85 Hokie, but it seems as though someone has switched out the pivot pin with something else cause there is no grease zerk in the end of the pin like yours so I will get busy on the lathe!!

Not sure if Im missing something , but the ram end of the cylinder that attaches to the bucket doesn't seem to have a grease zerk anywhere on the cylinder end or pivot pin. Not sure if or where I should drill to add a grease zerk. This is mounted on a 2002 BX22.

If you have no expectations you will have no disappointments!

Just turned 45 and recently got my first Kubota but have had Bolens for twenty years. Aaron

Gotta say the guy was funny at first!!!

what do you mean by ELC coolant? Is that the orange stuff?

I have to agree with BAP, check with your power company about rebates and incentives. After being an electrician for 16 years you need a light set up for your buildings aisle layout and ceiling height taken into great considerations, it will make or break a lighting project. You have a very high...

Greenhead, very nice idea and work that you did on the quicktach hitch! Excellent!

Nice idea but instead of buying wheels I made a bracket from some 1" shaft and some heavy wall pipe to make brackets that pin or bolt together and used the antiscalp wheels to move the MMM. After moving it a couple of times I modified the one bracket to mount two swivel 2 1/2" cast casters on...

I have been welding/fab for 25 years and you do get what you pay for!! Which is very noticeable in the quality of your cut. Just make sure you are buying the size machine you want because they can be rated different for the cut, granted home use dont need production but you dont want to spend...

Good luck as sometimes the snow gets deep in Minnesota. Blowing snow in reverse kinda sucks though. I was using a 1971 Bolens with a front blower for twenty years and updated to a 2002 BX22 also with front blower and can't believe the big improvement from a 2 stage and 5 more hp and the diesel...