Recent content by tradin1

i would love the file if it will work with a b7100. thx

I was thinking to get the 950 liners and pistons.

Obviously the cam, valves and maybe the inj pump could be bigger/different; but if the pistons are the same height with a bigger od it should give 1-2hp with a little turn at the inj pump. Does any one have either piston to measure? Thx

Looking at the specs all the engines in "d" family all have the same stroke, just different bores. I'm going to rebuild mine and figured I'd install d950 liners and pistons in hopes of a couple more hp. Are the valves bigger in the D950? Has anyone tried this yet? Thx

Dealer switched the pump out today. Bolted right up! Is there a suggested way to top off the hyd fluid and procedure for checking the fluid level? Thx

great thread, thx!!!

be sure and order the right pump off of the b8200 or it will not work. i have a thread that has the correct part number listed. i do not see why you couldnt use that pump, my limited understanding of hyd leads me to believe with the bigger pump with more flow and the same pressure it will just...

what do you think about this turbo for a b7100? http://www.ebay.com/itm/VMS-RACING-GT15-T15-TURBO-CHARGER-TURBOCHARGER-MOTORCYCLE-ATV-BIKE-WATERCRAFT-/360821253577 it has a 1.75" inlet and 1.5" outlet on the comperssor. i am adding the higher flow b8200 pump and want to add the turbo to get the...

ok so they are letting me exchange the pump!!!! not sure what the restocking fee will be yet as they are ordering the new to make sure it will work before we finalize everything. the pump in the diagram part# 6711-7610-0 is superseded with part# 6711-7610-3, which is the pump wolfman said i...

I'm an idiot!! You put in your post the small pic has the diagram of the pump I need! Is it me or does the the little diagram say the pump I need is part # 6711-7610? There also seems to be a dash next to it. do you have the rest of the diagram or know what the diagram number is? i want to...

Hey wolf, any chance for the other diagram? I want to go in the morn and try to get them to exchange this! Thx

Which steering valve did you order? How will you plumb it? I assume it will be full hydro, not steering assist?

this may be great news!!! i specificly asked for the pump that bolted to the back of the inj pump!!! can you send the diagram for the correct pump? the above diagram is of the actual pump i got, they even sold me that gasket (part 16) for the front of the plate. they said if i come in today...

This is the stock pump back on the tractor because it is supposed to rain tomorrow and she is outside. basiclly the in and out ports are opposite. the out is bigger that the in so it make a difference. otherwise it bolts right up. my b7100 is a late model 4x4 hst with 6 lug rims. let me...

This is the new pump. it is dimensional the same as the stock pump but maybe 1/4" taller than the stock pump.