Russell King's latest activity
-
RRussell King replied to the thread How best to add 3pt hitch.I would start with a trailer mover frame to get the geometry right. May be able to get one that has some removable receiver so it can...
-
RRussell King replied to the thread Broken Oil Drain Plug.There are also thin walled versions. I saw one that had 1/2 OD threads Seems like there are a lot of different versions of thread...
-
RRussell King replied to the thread Broken Oil Drain Plug.Here is some alternative to the helical helicoil that has M12 outer threads and M8 x 1.25 internal threads that could be used...
-
RRussell King replied to the thread B2400HSD clutch failure.May that is the quote for clutch plate and a few other clutch related parts? Looking at Messicks prices that could be the clutch plate...
-
-
RRussell King replied to the thread LX4020 Operators Suspension Seat Adjustment.Sorry I didn’t understand that it was full up. With that few of hours I would see if the dealer would replace the seat or repair it...
-
RRussell King replied to the thread Land Pride blade nut.Maybe should have replaced them a week or so ago?
-
RRussell King replied to the thread My gutless wonder.Another thought about what could be robbing power would be the hydraulic system being under too much load. Does the hydraulic pump or...
-
RRussell King replied to the thread Advice on front axle leak for B7300.Try Kubota books dot com. They are usually under the tractor operator‘s manual section. If yours is not there perhaps look at something...
-
RRussell King replied to the thread B7300 axle cener pivot.Try Kubota books dot com. They are usually under the tractor operator‘s manual section. If yours is not there perhaps look at...
-
RRussell King replied to the thread Broken Oil Drain Plug.If you look at the plug, I see several plug threads that are full of the oil pan threads. I think I would be thinking about going up...
-
RRussell King replied to the thread LX4020 Operators Suspension Seat Adjustment.I would think the pivot points that allow the seat to move up or down are corroded and won’t move. spray all the pinned pivots with a...
-
RRussell King replied to the thread Broken Oil Drain Plug.If you can’t get the drain plug out by pulling on it as you’re unscrewing it or by prying and pulling on it you may have to resort to...
-
RRussell King replied to the thread Bent Stand LA344S.Flip it vertical and chain it to the wall out of the way. On its end or side.
-
RRussell King replied to the thread Leak at cylinder fitting.If it was me having the problem and no good way to fix it myself, I would take it to a hydraulic cylinder repair shop and have them...
-
RRussell King replied to the thread B2150 no start problem?.I don’t think I saw any mention of the air filter. You may want to check that there is nothing in the air intake or the filter itself...
