Recent content by Rouschty

I finally took off the tank to remove the connector. Indeed it is a 1/8"-28 BSPT thread which is, as it seems commonly used in Japan (japanese JIS standards).

The outer diameter of the thread which is connected to the one quick coupling is approx. 3/8" in diameter which would come close to a 1/4" BSP thread. A 1/4" BSP thread has 28 threads per inch. However I think that the thread which I have is closer to 20 threads per inch. Due to the limited...

I own a Kubota B1-14 and I intend to add a hydraulic top link to my 3pt hitch. The B1-14 comes with an auxiliary hydraulic connector on an electrically operated solenoid valve. The problem is that the thread diameter from the solenoid valve( seems to be 3/8") is far smaller than the pipe...

Hi Carl, Long time no see. I am quite impressed when I saw what you did with your B1-15. Did you finally find out the secrets of that solenoid valve? I actually have exactly the same setup on my B1-14 and wonder whether I could use it together with the hydraulic hose with quick connector to...

Hi, I own a Kubota RS1200 tiller and would like to make a complete overhaul as it seems that it has been waiting outside for years. The oil plug is broken, so the central gear case is filled with a mix of water, oil and dust. Does anyone know where I can find a maintenance manual or parts lists?

Hi Carl, My try and error operation method to extract the entire Monroematic control box incl. its wiring harness was finally successful. All required functions are performing. :) Regards

Does anybody have an electrical diagram of a tractor with Monroematic? The Monroematic controls of my B1-14 are defect and I would like to do some rewiring to change the hydraulic controls to conventional operation type.

I already checked at E-bay. Did not find service manuals for the B1 series.

I own a Kubota B1-14. Does anyboby know where I can find a WSM manual?